EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Load Characteristics in the Cutting of Three Types of Bauxite by Conical Picks

Weipeng Xu, Bin Zhang, Nangeng Yue, Kuidong Gao, Ziyao Ma, Shengru Zhang, Xiaodi Zhang, Yu Bu

Applied Sciences · 11.03.2026 · 16 (6) · 2695

DOI: 10.3390/app16062695 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 11.03.2026. Verfasst von Weipeng Xu und 7 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Underground bauxite comprehensive mechanized mining has attracted growing attention, yet regional differences in bauxite characteristics challenge its applicability and economic efficiency. The conical pick, a key cutting tool for this mining method, has cutting load characteristics that directly impact the cutting mechanism’s efficiency and reliability. Three typical bauxite samples from different mining areas were selected as research objects. After testing their composition and firmness coefficients, a linear cutting test bench was used to measure their tri-axial cutting forces at various cutting depths. Regression analysis and the linear fitting of cutting coefficients were conducted to study cutting force and normal force (two core cutting loads). The results show that power functions effectively describe the relationships between the cutting force, normal force, fluctuation coefficient and cutting depth. As the bauxite firmness coefficient and cutting depth rise, the cutting force peak value, fluctuation amplitude and frequency all increase. Excessively high or low cutting coefficients reduce the cutting efficiency; only when both the cutting coefficient and the depth are in an optimal range can the cutting efficiency reach its maximum.

Förderung

  • the National Natural Science Foundation of China

Zitieren

APA

Xu, W., Zhang, B., Yue, N., Gao, K., Ma, Z., Zhang, S., Zhang, X., & Bu, Y. (2026). Load Characteristics in the Cutting of Three Types of Bauxite by Conical Picks. Applied Sciences, 16(6), 2695. https://doi.org/10.3390/app16062695

Vancouver

Xu W, Zhang B, Yue N, Gao K, Ma Z, Zhang S, et al. Load Characteristics in the Cutting of Three Types of Bauxite by Conical Picks. Applied Sciences. 2026;16(6):2695. doi:10.3390/app16062695

BibTeX
@article{Xu2026,
  author = {Xu, Weipeng and Zhang, Bin and Yue, Nangeng and Gao, Kuidong and Ma, Ziyao and Zhang, Shengru and Zhang, Xiaodi and Bu, Yu},
  title = {Load Characteristics in the Cutting of Three Types of Bauxite by Conical Picks},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {2695},
  doi = {10.3390/app16062695}
}
Kostenlos starten →