EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Model Testing of Piston Ring–Cylinder Liner Contacts at Constant Relative Velocity—An Expansion to Linear Tribometers

Jakob Gussmagg, Robin Bickel, Thomas Markut, Michael Pusterhofer, Florian Grün

Applied Sciences · 10.03.2026 · 16 (6) · 2641

DOI: 10.3390/app16062641 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 10.03.2026. Verfasst von Jakob Gussmagg und 4 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reducing friction in the piston ring–cylinder liner contact is a key area for improving the efficiency of internal combustion engines. While tribological studies commonly focus on the top dead centre region using linear tribometers, the mid-stroke regime—with its higher sliding velocities—remains experimentally inaccessible to most conventional test methods. This study presents a rotating ring-on-liner tribometer that enables investigations at constant relative speed by transitioning the motion from oscillating to rotating. A cylindrical substitution geometry for the piston ring specimen is derived through a coupled elastohydrodynamic and asperity contact simulation approach to reproduce realistic load-sharing behaviour. Experimental results from starved lubrication tests demonstrate stable contact conditions with a low coefficient of variation in wear, confirming good reproducibility. Stepwise performed Stribeck tests at 40 °C and 100 °C reveal characteristic friction–velocity behaviour, including the transition from mixed to hydrodynamic lubrication. Although the test rig’s maximum sliding speed and steady-state thermal conditions differ from fired engine environments, the methodology closes an important gap between low-speed linear tribometers and complex floating-liner systems. The presented approach provides a flexible and robust platform for controlled parametric studies of ring-on-liner contacts under application-relevant lubrication regimes.

Zitieren

APA

Gussmagg, J., Bickel, R., Markut, T., Pusterhofer, M., & Grün, F. (2026). Model Testing of Piston Ring–Cylinder Liner Contacts at Constant Relative Velocity—An Expansion to Linear Tribometers. Applied Sciences, 16(6), 2641. https://doi.org/10.3390/app16062641

Vancouver

Gussmagg J, Bickel R, Markut T, Pusterhofer M, Grün F. Model Testing of Piston Ring–Cylinder Liner Contacts at Constant Relative Velocity—An Expansion to Linear Tribometers. Applied Sciences. 2026;16(6):2641. doi:10.3390/app16062641

BibTeX
@article{Gussmagg2026,
  author = {Gussmagg, Jakob and Bickel, Robin and Markut, Thomas and Pusterhofer, Michael and Grün, Florian},
  title = {Model Testing of Piston Ring–Cylinder Liner Contacts at Constant Relative Velocity—An Expansion to Linear Tribometers},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {2641},
  doi = {10.3390/app16062641}
}
Kostenlos starten →