A Novel Inlet Guiding Structure for Pressure-Loss Reduction in Gas–Liquid Cyclone Separators
Applied Sciences · 09.03.2026 · 16 (5) · 2605
DOI: 10.3390/app16052605 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 09.03.2026. Verfasst von Dongjing Chen und 6 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Gas–liquid cyclone separators are an efficient and emerging method for air removal in hydraulic systems, yet often suffer from excessive pressure loss. A novel contracting inlet guiding structure is proposed to minimize hydraulic losses. This study adopts a comprehensive methodology combining theoretical modeling, computational fluid dynamics (CFD) using the Reynolds Stress Model (RSM), and experimental validation. A theoretical pressure-loss model incorporating the diminishing-returns effect of the contraction angle was established. Simulations revealed that increasing the contraction angle reduces energy dissipation by improving the uniformity of the tangential-velocity field. Based on the balance between pressure-loss reduction and degassing potential, a contraction angle of 11° was identified as the optimal design and experimental tests on a prototype confirmed the validity of the numerical model. The results demonstrate that, compared to the conventional straight tangential inlet, the optimized inlet reduces the pressure loss by approximately 30% under rated conditions. The experimental–numerical discrepancy decreases significantly with flow rate, achieving a relative error of approximate 10% at the design flow rate. These findings provide a theoretical basis and practical guidance for the low-energy design of hydraulic cyclone separators.
Zitieren
APA
Chen, D., Zhang, J., Cheng, Y., Wang, J., Wang, Z., Li, Y., & Kong, X. (2026). A Novel Inlet Guiding Structure for Pressure-Loss Reduction in Gas–Liquid Cyclone Separators. Applied Sciences, 16(5), 2605. https://doi.org/10.3390/app16052605
Vancouver
Chen D, Zhang J, Cheng Y, Wang J, Wang Z, Li Y, et al. A Novel Inlet Guiding Structure for Pressure-Loss Reduction in Gas–Liquid Cyclone Separators. Applied Sciences. 2026;16(5):2605. doi:10.3390/app16052605
BibTeX
@article{Chen2026,
author = {Chen, Dongjing and Zhang, Jin and Cheng, Yujie and Wang, Jihui and Wang, Zhiyuan and Li, Ying and Kong, Xiangdong},
title = {A Novel Inlet Guiding Structure for Pressure-Loss Reduction in Gas–Liquid Cyclone Separators},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {5},
pages = {2605},
doi = {10.3390/app16052605}
}
EUVIMED