EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Investigation of Perforation in Microcrack Propagation and Damage Analysis at the Cement Sheath

Yu Yao, Yan Xi, Jian He, Jianhua Zhao, Xianming Sun, Ming Liu

Applied Sciences · 13.01.2026 · 16 (2) · 805

DOI: 10.3390/app16020805 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 13.01.2026. Verfasst von Yu Yao und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Chongqing Natural Science Foundation, Foundation of the State Key Laboratory of Petroleum Resources and Engineering.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wellbore integrity maintenance constitutes a fundamental safety and technological challenge throughout the entire lifecycle of oil and gas wells (including production, injection, and CO2 sequestration operations). As a critical completion phase, perforation generates a high-temperature, high-pressure shaped charge jet that impacts and compromises wellbore structural integrity. This process may induce failure in both the cement sheath body and its interfacial zones, potentially creating fluid migration pathways along the cement-casing interface through perforation tunnels. Current research remains insufficient in quantitatively evaluating cement sheath damage resulting from perforation operations. Addressing this gap, this study incorporates dynamic jet effects during perforation and establishes a numerical model simulating high-velocity jet penetration through casing–cement target–formation composites using a rock dynamics-based constitutive model. The investigation analyzes failure mechanisms within the cement sheath matrix and its boundaries during perforation penetration, while examining the influence of mechanical parameters (compressive strength and shear modulus) of both cement sheath and formation on damage characteristics. Results demonstrate that post-perforation cement sheath aperture exhibits convergent–divergent profiles along the tunnel axis, containing exclusively radial fractures. Primary fractures predominantly initiate at the inner cement wall, whereas microcracks mainly develop at the outer boundary. Enhanced cement compressive strength significantly suppresses fracture initiation at both boundaries: when increasing from 55 MPa to 75 MPa, the undamaged area ratio rises by 16.6% at the inner wall versus 11.2% at the outer interface. Meanwhile, increasing the formation shear modulus from 10 GPa to 15 GPa reduces cement target failure radius by 0.4 cm. Cement systems featuring high compressive strength and low shear modulus demonstrate superior performance in mitigating perforation-induced debonding.

Förderung

  • National Natural Science Foundation of China
  • Chongqing Natural Science Foundation
  • Foundation of the State Key Laboratory of Petroleum Resources and Engineering

Zitieren

APA

Yao, Y., Xi, Y., He, J., Zhao, J., Sun, X., & Liu, M. (2026). Numerical Investigation of Perforation in Microcrack Propagation and Damage Analysis at the Cement Sheath. Applied Sciences, 16(2), 805. https://doi.org/10.3390/app16020805

Vancouver

Yao Y, Xi Y, He J, Zhao J, Sun X, Liu M. Numerical Investigation of Perforation in Microcrack Propagation and Damage Analysis at the Cement Sheath. Applied Sciences. 2026;16(2):805. doi:10.3390/app16020805

BibTeX
@article{Yao2026,
  author = {Yao, Yu and Xi, Yan and He, Jian and Zhao, Jianhua and Sun, Xianming and Liu, Ming},
  title = {Numerical Investigation of Perforation in Microcrack Propagation and Damage Analysis at the Cement Sheath},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {805},
  doi = {10.3390/app16020805}
}
Kostenlos starten →