EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Solar-Energy Applications of PbS Quantum Dots via In Situ Methods

Binh Duc Nguyen, Hyun Kuk Lee, Jae-Yup Kim

Applied Sciences · 06.01.2026 · 16 (2) · 589

DOI: 10.3390/app16020589 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 06.01.2026. Verfasst von Binh Duc Nguyen und 2 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Human Resources Development Program of the Korea Institute of Energy Technology Evaluation and Planning, Korea Institute of Energy Technology Evaluation and Planning.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In situ preparation routes have become central to advancing lead sulfide (PbS) quantum dots (QDs) for solar-energy conversion, owing to their ability to create strongly coupled QD/oxide interfaces that are difficult to achieve with ex situ colloidal methods, along with their simplicity and potential for low-cost, scalable processing. This review systematically examines the fundamental mechanisms, processing levers, and device implications of the dominant in situ approaches successive ionic layer adsorption and reaction (SILAR), voltage-assisted SILAR (V-SILAR), and chemical bath deposition (CBD). These methods enable conformal QD nucleation within mesoporous scaffolds, improved electronic coupling, and scalable low-temperature fabrication, forming the materials foundation for high-performance PbS-based architectures. We further discuss how these in situ strategies translate into enhanced solar-energy applications, including quantum-dot-sensitized solar cells (QDSSCs) and photoelectrochemical (PEC) hydrogen production, highlighting recent advances in interfacial passivation, scaffold optimization, and bias-assisted growth that collectively suppress recombination and boost photocurrent utilization. Representative device metrics reported in recent studies indicate that in-situ-grown PbS quantum dots can deliver photocurrent densities on the order of ~5 mA cm−2 at applied potentials around 1.23 V versus RHE in photoelectrochemical systems, while PbS-based quantum-dot-sensitized solar cells typically achieve power conversion efficiencies in the range of ~4–10%, depending on interface engineering and device architecture. These performances are commonly associated with conformal PbS loading within mesoporous scaffolds and quantum-dot sizes in the few-nanometer regime, underscoring the critical role of morphology and interfacial control in charge transport and recombination. Recent studies indicate that performance improvements in PbS-based solar-energy devices are primarily governed by interfacial charge-transfer kinetics and recombination suppression rather than QD loading alone, with hybrid heterostructures and inorganic passivation layers playing a key role in modifying band offsets and surface trap densities at the PbS/oxide interface. Remaining challenges are associated with defect-mediated recombination, transport limitations in densely loaded porous scaffolds, and long-term chemical stability, which must be addressed to enable scalable and durable PbS-based photovoltaic and photoelectrochemical technologies.

Förderung

  • Human Resources Development Program of the Korea Institute of Energy Technology Evaluation and Planning
  • Korea Institute of Energy Technology Evaluation and Planning

Zitieren

APA

Nguyen, B. D., Lee, H. K., & Kim, J. (2026). Preparation and Solar-Energy Applications of PbS Quantum Dots via In Situ Methods. Applied Sciences, 16(2), 589. https://doi.org/10.3390/app16020589

Vancouver

Nguyen BD, Lee HK, Kim J. Preparation and Solar-Energy Applications of PbS Quantum Dots via In Situ Methods. Applied Sciences. 2026;16(2):589. doi:10.3390/app16020589

BibTeX
@article{Nguyen2026,
  author = {Nguyen, Binh Duc and Lee, Hyun Kuk and Kim, Jae-Yup},
  title = {Preparation and Solar-Energy Applications of PbS Quantum Dots via In Situ Methods},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {589},
  doi = {10.3390/app16020589}
}
Kostenlos starten →