Analysis of Pore Structure Characteristics and Controlling Factors of Shale Reservoirs: A Case Study of the Qing-1 Member in Gulong Sag, Songliao Basin, China
Applied Sciences · 29.12.2025 · 16 (1) · 343
DOI: 10.3390/app16010343 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 29.12.2025. Verfasst von Shanshan Li und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The characteristics of shale oil reservoirs, such as low porosity, ultra-low permeability, and complex pore structure, are key factors affecting effective pore space and fluid migration. This study focuses on medium-to-high maturity mud shale in the Qing-1 Member of the Qingshankou Formation in the Gulong Sag. Using methods such as XRD, organic geochemical testing, and multi-scale pore characterization (FE-SEM, low-temperature CO2–N2 adsorption, high-pressure mercury intrusion, and CT scanning), the lithofacies and pore structure were comprehensively characterized, and their controlling factors were analyzed. The results indicate: (1) The mineral composition is dominated by felsic and clay minerals. Based on a three-level classification standard of “mineral composition–sedimentary structure–organic matter abundance”, seven subfacies were identified, with the dominant lithofacies being Felsic–Clayey Mixed Shale and Felsic-bearing Clay Shale. (2) The reservoir space consists of inorganic pores, organic pores, microfractures, and a small amount of other auxiliary pores, exhibiting “bimodal” pore size characteristics. Micro–mesopores dominate adsorption, while macropores/microfractures control free oil seepage; mesopores contribute the most to pore volume. (3) In terms of oil-bearing potential, Felsic–Clayey Mixed Shale shows prominent movable oil potential (average OSI: 133.08 mg/g; S1 > 2 mg/g, OSI > 100 mg/g). (4) CT-based 3D stick-and-ball models indicate that Felsic–Clayey Mixed Shale has the best connectivity (connectivity rate: 30.63%), with throat radii mostly ranging from 1–15 μm and pore radii from 2–20 μm. (5) Pore development is synergistically controlled by total organic carbon (TOC, with an optimal range of approximately 1–2.5%), clay/felsic mineral ratio, and bedding/structural fractures. The formation of the pore system is the result of dynamic coupling of organic–inorganic interactions during diagenetic evolution: intergranular pores of clay minerals and microfractures jointly contribute to specific surface area and pore volume, while bedding fractures connect nanopore clusters to enhance seepage capacity. This study improves the integrated understanding of dominant lithofacies, pore structure, and oil-bearing potential in the Qing-1 Member of the Gulong Sag, providing a basis for sweet spot evaluation and development optimization.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, S., Lei, Z., Hu, W., Shi, H., & Wu, W. (2025). Analysis of Pore Structure Characteristics and Controlling Factors of Shale Reservoirs: A Case Study of the Qing-1 Member in Gulong Sag, Songliao Basin, China. Applied Sciences, 16(1), 343. https://doi.org/10.3390/app16010343
Vancouver
Li S, Lei Z, Hu W, Shi H, Wu W. Analysis of Pore Structure Characteristics and Controlling Factors of Shale Reservoirs: A Case Study of the Qing-1 Member in Gulong Sag, Songliao Basin, China. Applied Sciences. 2025;16(1):343. doi:10.3390/app16010343
BibTeX
@article{Li2025,
author = {Li, Shanshan and Lei, Zhongying and Hu, Wangshui and Shi, Huanshan and Wu, Wangfa},
title = {Analysis of Pore Structure Characteristics and Controlling Factors of Shale Reservoirs: A Case Study of the Qing-1 Member in Gulong Sag, Songliao Basin, China},
journal = {Applied Sciences},
year = {2025},
volume = {16},
number = {1},
pages = {343},
doi = {10.3390/app16010343}
}
EUVIMED