EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Frictional Impact with Rebound for 3D Printed Surfaces

Ahmet Faruk Akhan, Dan Marghitu

Applied Sciences · 23.11.2025 · 15 (23) · 12427

DOI: 10.3390/app152312427 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 23.11.2025. Verfasst von Ahmet Faruk Akhan und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research explores the oblique impact with rebound of a rigid rod and 3D-printed surfaces with varying infill ratios. A visco-elastic contact model is developed using normal impact experiments and then confirmed with oblique impact experiments. The force coefficients are determined using a genetic algorithm. The impact on the polylactic acid surface is defined by a coefficient of restitution, coefficient of friction, and the coefficients of the contact force. The simulations demonstrate good compatibility with the experimental data.

Zitieren

APA

Akhan, A. F., & Marghitu, D. (2025). The Frictional Impact with Rebound for 3D Printed Surfaces. Applied Sciences, 15(23), 12427. https://doi.org/10.3390/app152312427

Vancouver

Akhan AF, Marghitu D. The Frictional Impact with Rebound for 3D Printed Surfaces. Applied Sciences. 2025;15(23):12427. doi:10.3390/app152312427

BibTeX
@article{Akhan2025,
  author = {Akhan, Ahmet Faruk and Marghitu, Dan},
  title = {The Frictional Impact with Rebound for 3D Printed Surfaces},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {23},
  pages = {12427},
  doi = {10.3390/app152312427}
}
Kostenlos starten →