EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Viscous Boundary Layer Mesh Adaptation Method and Its Application in High-Angle-of-Attack Separated Flows

Pengcheng Cui, Xiaojun Wu, Jiangtao Chen, Hongyin Jia, Fan Qin, Jie Zhang, Yaobing Zhang, Guiyu Zhou, Jing Tang

Applied Sciences · 30.10.2025 · 15 (21) · 11615

DOI: 10.3390/app152111615 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 30.10.2025. Verfasst von Pengcheng Cui und 8 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Numerical Wind Tunnel Project, and the Pre-study Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Adjoint-based mesh adaptation method serves as an effective approach to improve the predictive accuracy of aerodynamic characteristics. However, viscous boundary layer grids often encounter issues such as hanging nodes, negative volumes, and directional constraints during adaptation, significantly limiting their practical application. To address these challenges, this study proposes an innovative polyhedral conversion strategy. Cells containing hanging nodes resulting from refinement are converted into polyhedra, effectively eliminating topological constraints between adjacent mesh elements. This approach is combined with surface-conforming projection and distance function-based mesh deformation techniques to ensure precise geometric representation and high mesh quality after adaptation. Numerical experiments demonstrate that the proposed viscous boundary layer mesh adaptation strategy successfully handles both refinement and coarsening of boundary layer grids. In a typical high-angle-of-attack case for the NACA0012 airfoil, the adjoint-based mesh adaptation method reduced lift coefficient error from 4.21% to 0.30% after four adaptation cycles. For the CHN-F1 low-aspect-ratio flying wing configuration, the method reduced the lift discrepancy from 10.05% to 6.65% at 40° angle of attack. The polyhedral conversion approach effectively resolves common challenges in viscous boundary layer mesh adaptation, providing a robust solution for high-fidelity prediction of aerodynamic characteristics with significantly improved accuracy.

Förderung

  • National Natural Science Foundation of China
  • National Numerical Wind Tunnel Project, and the Pre-study Project

Zitieren

APA

Cui, P., Wu, X., Chen, J., Jia, H., Qin, F., Zhang, J., Zhang, Y., Zhou, G., & Tang, J. (2025). A Viscous Boundary Layer Mesh Adaptation Method and Its Application in High-Angle-of-Attack Separated Flows. Applied Sciences, 15(21), 11615. https://doi.org/10.3390/app152111615

Vancouver

Cui P, Wu X, Chen J, Jia H, Qin F, Zhang J, et al. A Viscous Boundary Layer Mesh Adaptation Method and Its Application in High-Angle-of-Attack Separated Flows. Applied Sciences. 2025;15(21):11615. doi:10.3390/app152111615

BibTeX
@article{Cui2025,
  author = {Cui, Pengcheng and Wu, Xiaojun and Chen, Jiangtao and Jia, Hongyin and Qin, Fan and Zhang, Jie and Zhang, Yaobing and Zhou, Guiyu and Tang, Jing},
  title = {A Viscous Boundary Layer Mesh Adaptation Method and Its Application in High-Angle-of-Attack Separated Flows},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {21},
  pages = {11615},
  doi = {10.3390/app152111615}
}
Kostenlos starten →