Influence of Fin Spacing and Fin Height in Passive Heat Sinks: Numerical Analysis with Experimental Comparison
Applied Sciences · 24.10.2025 · 15 (21) · 11410
DOI: 10.3390/app152111410 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 24.10.2025. Verfasst von Mateo Kirinčić und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Rijeka.
Abstract (Originalsprache)
In this paper, heat dissipation through a passive vertical plate fin heat sink via natural convection was numerically investigated. The influence of two nondimensional geometric parameters, fin spacing-to-thickness ratio and fin height-to-spacing ratio, on the heat sink’s thermal performance was evaluated. A mathematical model describing the three-dimensional steady-state problem of buoyancy-driven flow and heat transfer was formulated. The solution was obtained numerically using the finite volume method in Ansys Fluent. The model and numerical procedure were validated by comparing the numerical predictions with measurements acquired on a constructed experimental apparatus. The heat sink thermal performance was assessed based on a series of performance metrics: heat dissipation rate, heat transfer coefficient, overall thermal resistance, and fin efficiency. Fin spacing-to-thickness ratio was varied between 1.86 and 4.8. Heat dissipation rate displayed a clear peak at a value of approximately 2.6, which coincided with a minimum in the overall thermal resistance. The heat transfer coefficient initially grew steadily, but at higher values of fin spacing-to-thickness ratio, it began to stagnate. Fin efficiency consistently decreased across the investigated range. Fin height-to-spacing ratio was varied between 1.11 and 7.78. The heat dissipation rate increased almost linearly across this range, but when the mass-specific heat dissipation rate was considered, it yielded diminishing returns. The heat transfer coefficient likewise exhibited a plateauing trend, while fin efficiency decreased steadily across the investigated range of fin height-to-spacing ratio. The obtained numerical results provide guidelines for geometry selection and can serve as a foundation for further analyses and optimizations of passive heat sinks’ thermal performance.
Förderung
- University of Rijeka
Zitieren
APA
Kirinčić, M., Fadiga, T., & Delač, B. (2025). Influence of Fin Spacing and Fin Height in Passive Heat Sinks: Numerical Analysis with Experimental Comparison. Applied Sciences, 15(21), 11410. https://doi.org/10.3390/app152111410
Vancouver
Kirinčić M, Fadiga T, Delač B. Influence of Fin Spacing and Fin Height in Passive Heat Sinks: Numerical Analysis with Experimental Comparison. Applied Sciences. 2025;15(21):11410. doi:10.3390/app152111410
BibTeX
@article{Kirini2025,
author = {Kirinčić, Mateo and Fadiga, Tin and Delač, Boris},
title = {Influence of Fin Spacing and Fin Height in Passive Heat Sinks: Numerical Analysis with Experimental Comparison},
journal = {Applied Sciences},
year = {2025},
volume = {15},
number = {21},
pages = {11410},
doi = {10.3390/app152111410}
}
EUVIMED