EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Microscopic Properties and Calibration on the Mechanical Behavior of Cohesive Soil-Rock Mixtures Based on Discrete Element Method

Yong Huang, Min Deng, Fei Yao, Wei Luo, Lianheng Zhao

Applied Sciences · 29.09.2025 · 15 (19) · 10529

DOI: 10.3390/app151910529 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 29.09.2025. Verfasst von Yong Huang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Project of Jiangxi Provincial Department of Transportation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Selecting a reasonable mesoscopic contact model and corresponding contact parameters is a key problem in discrete element simulation. In order to characterize the mesoscopic contact characteristics between particles in cohesive soil–rock mixture (CSRM), a set of laboratory consolidated and undrained triaxial tests were conducted on remolded samples of clay and CSRM collected in situ. Based on the experiments, 2D discrete element models of clay and CSRM were established, respectively. Considering the difference in the mechanical characteristics between soil particles and between soil and rock particles, different types of contact model were applied. The effects of the contact stiffness, bond strength, and friction coefficient between soil particles and between soil and rock particles on the stress–strain curves of both clay and CSRM numerical samples were sequentially studied by parameter sensitivity analysis. Results show that the contact stiffness and friction coefficient between soil particles affect the initial tangent modulus, the peak stress and the post-peak residual stress of the clay sample, while the bonding strength only affects its peak stress and residual stress. However, the mesoscopic contact parameters between soil and rock particles have little effect on the initial tangent modulus of CSRM sample but have a certain impact on the development of stress in the plastic stage, among which the influences of normal bonding strength and friction coefficient between soil and rock particles are more obvious. Finally, according to the comparison between the laboratory test results and the corresponding numerical simulation results in both clay and CSRM samples, mesoscopic contact parameters in CSRM were calibrated.

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Project of Jiangxi Provincial Department of Transportation

Zitieren

APA

Huang, Y., Deng, M., Yao, F., Luo, W., & Zhao, L. (2025). Effects of Microscopic Properties and Calibration on the Mechanical Behavior of Cohesive Soil-Rock Mixtures Based on Discrete Element Method. Applied Sciences, 15(19), 10529. https://doi.org/10.3390/app151910529

Vancouver

Huang Y, Deng M, Yao F, Luo W, Zhao L. Effects of Microscopic Properties and Calibration on the Mechanical Behavior of Cohesive Soil-Rock Mixtures Based on Discrete Element Method. Applied Sciences. 2025;15(19):10529. doi:10.3390/app151910529

BibTeX
@article{Huang2025,
  author = {Huang, Yong and Deng, Min and Yao, Fei and Luo, Wei and Zhao, Lianheng},
  title = {Effects of Microscopic Properties and Calibration on the Mechanical Behavior of Cohesive Soil-Rock Mixtures Based on Discrete Element Method},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {19},
  pages = {10529},
  doi = {10.3390/app151910529}
}
Kostenlos starten →