EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Predictive Models for the Convective Drying Kinetics of Pinus spp. Energy Wood Chips

Víctor Daniel Núñez-Retana, Artemio Carrillo-Parra, José Antonio Escobar Machado, Diego-David Moposita-Vasquez, Borja Velázquez-Martí

Applied Sciences · 15.09.2025 · 15 (18) · 10081

DOI: 10.3390/app151810081 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 15.09.2025. Verfasst von Víctor Daniel Núñez-Retana und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SENER-CONACYT, Clúster de Biocombustibles Sólidos para la generación térmica y eléctrica, CONACYT.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The phenomena of capillarity, dipole–dipole attractions, and hydrogen bonding make the application of mass transfer models to predict the drying rate by air convection in wood chips imprecise. So, the modification of these models by tailoring their equations is required. This study aims to adapt theoretical mass transfer models to improve the prediction of drying time for Pinus spp. chips subjected to a known hot air stream with known velocity, temperature, and relative humidity. An experimental device was constructed to control the variables, where the air stream passes vertically through a cylinder filled with wood chips. The tested air velocities ranged between 7 and 10 m/s, with relative humidity between 10 and 30% and temperatures between 40 and 70 °C with 3 and 6 cm chip columns. It was demonstrated that the drying rate of chips in a convective process with air is not constant but rather decreases over time, and that the critical moisture content is above 42%. Factors such as the height of the chips pile influence the predictive equations for the drying rate. The average relative drying rate ranged between 0.063 and 0.040 g of water s−1 kg of dry chip−1 in both heights; meanwhile, the average absolute drying rate was between 0.0031 and 0.0032 g of water s−1. Modifications of the models have been developed that adjust theoretical values with experimental values, resulting in an r2 value of 0.80.

Förderung

  • SENER-CONACYT
  • Clúster de Biocombustibles Sólidos para la generación térmica y eléctrica
  • CONACYT
  • UANL Foundation

Zitieren

APA

Núñez-Retana, V. D., Carrillo-Parra, A., Machado, J. A. E., Moposita-Vasquez, D., & Velázquez-Martí, B. (2025). Predictive Models for the Convective Drying Kinetics of Pinus spp. Energy Wood Chips. Applied Sciences, 15(18), 10081. https://doi.org/10.3390/app151810081

Vancouver

Núñez-Retana VD, Carrillo-Parra A, Machado JAE, Moposita-Vasquez D, Velázquez-Martí B. Predictive Models for the Convective Drying Kinetics of Pinus spp. Energy Wood Chips. Applied Sciences. 2025;15(18):10081. doi:10.3390/app151810081

BibTeX
@article{NezRetana2025,
  author = {Núñez-Retana, Víctor Daniel and Carrillo-Parra, Artemio and Machado, José Antonio Escobar and Moposita-Vasquez, Diego-David and Velázquez-Martí, Borja},
  title = {Predictive Models for the Convective Drying Kinetics of Pinus spp. Energy Wood Chips},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {18},
  pages = {10081},
  doi = {10.3390/app151810081}
}
Kostenlos starten →