The Impact of Process Variations on the Thermo-Mechanical Behavior of 3D Integrated Circuits
Applied Sciences · 08.09.2025 · 15 (17) · 9847
DOI: 10.3390/app15179847 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 08.09.2025. Verfasst von Yi-Cheng Chan und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The use of vertically stacked architectures in three-dimensional integrated circuits (3DICs) offers a transformative path for advancing Moore’s Law by significantly boosting computational density. A key obstacle arises from the integration of heterogeneous materials, which introduces critical thermo-mechanical challenges, particularly due to the mismatch in the coefficients of thermal expansion (CTE) of silicon (Si) and copper (Cu). Such mismatches can compromise mechanical reliability and complicate the definition of the keep-out zone (KOZ) in dense systems. This paper provides a detailed analysis of the thermo-mechanical behavior of stacked 3DICs, exploring a range of device geometries and process conditions. The findings reveal that CTE-induced stress is the dominant factor influencing mechanical integrity, surpassing other mechanical forces. It is concluded that the KOZ must be no less than 1.5 times the feature diameter to adequately mitigate stress-related risks. Additionally, thermal stress interactions in configurations with adjacent structures can increase the KOZ requirement by up to 33.3% relative to isolated instances. Yet, multi-layered designs show enhanced thermal performance, a benefit attributed to the high thermal conductivity of copper. The knowledge gained from this study provides a valuable framework for optimizing the reliability and thermal management of 3DIC systems and is especially relevant for high-performance sensor devices where both mechanical stability and efficient heat dissipation are vital.
Zitieren
APA
Chan, Y., Liao, M., & Yao, C. (2025). The Impact of Process Variations on the Thermo-Mechanical Behavior of 3D Integrated Circuits. Applied Sciences, 15(17), 9847. https://doi.org/10.3390/app15179847
Vancouver
Chan Y, Liao M, Yao C. The Impact of Process Variations on the Thermo-Mechanical Behavior of 3D Integrated Circuits. Applied Sciences. 2025;15(17):9847. doi:10.3390/app15179847
BibTeX
@article{Chan2025,
author = {Chan, Yi-Cheng and Liao, Ming-Han and Yao, Chun-Wei},
title = {The Impact of Process Variations on the Thermo-Mechanical Behavior of 3D Integrated Circuits},
journal = {Applied Sciences},
year = {2025},
volume = {15},
number = {17},
pages = {9847},
doi = {10.3390/app15179847}
}
EUVIMED