EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Generative Design, Simulation, and 3D Printing of the Quadcopter Drone Frame

Victor Andries, Sebastian-Marian Zaharia

Applied Sciences · 02.09.2025 · 15 (17) · 9647

DOI: 10.3390/app15179647 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 02.09.2025. Verfasst von Victor Andries und 1 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Transilvania University of Brasov.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The frame of a quadcopter drone is the most important component, as it supports all other systems and plays a vital structural role, supporting the stresses that appear during flight. The objective was to reduce the weight of the frame (18% reduction compared to the original version manufactured from carbon fibre), while maintaining structural integrity, by using an integrated strategy that includes optimizing the frame shape according to the components used, the stresses it must withstand, and considerations related to design for additive manufacturing. The optimization of the quadcopter drone frame was achieved using generative design and additive technologies (3D printing) and represents a cutting-edge approach in aerospace engineering, which allows for overcoming the limitations of traditional manufacturing methods. This study successfully completed all stages of the aeronautical product development cycle, from preliminary design, generative design, structural analysis, and 3D printing to assembly and functionality testing. The integration of generative design and 3D printing into the aeronautical product development cycle represents a complex and feasible challenge, with advantages in terms of efficiency, performance, and innovation capacity that fully justify the effort.

Förderung

  • Transilvania University of Brasov

Zitieren

APA

Andries, V., & Zaharia, S. (2025). Generative Design, Simulation, and 3D Printing of the Quadcopter Drone Frame. Applied Sciences, 15(17), 9647. https://doi.org/10.3390/app15179647

Vancouver

Andries V, Zaharia S. Generative Design, Simulation, and 3D Printing of the Quadcopter Drone Frame. Applied Sciences. 2025;15(17):9647. doi:10.3390/app15179647

BibTeX
@article{Andries2025,
  author = {Andries, Victor and Zaharia, Sebastian-Marian},
  title = {Generative Design, Simulation, and 3D Printing of the Quadcopter Drone Frame},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {17},
  pages = {9647},
  doi = {10.3390/app15179647}
}
Kostenlos starten →