The Study on the Relation Between Rock Indentation Crater Morphology and Rock Mechanical Index Based on Indentation Experiments
Applied Sciences · 27.08.2025 · 15 (17) · 9410
DOI: 10.3390/app15179410 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 27.08.2025. Verfasst von Zhenkun Wu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Understanding rock behavior under cutting tools is critical for enhancing cutting processes and forecasting rock behavior in engineering contexts. This study examines the link between mechanical properties and indentation crater morphology of six rocks using a conical indenter until initial fracture. Through indentation testing, mechanical properties (indentation stiffness index k and hardness index HI) were assessed, and crater morphology was analyzed using a 3D laser profilometer. The rocks were categorized into three groups based on specific energy: Class I (slate, shale), Class II (sandstone, marble), and Class III (granite, gneiss). The morphological features of their indentation craters were analyzed both quantitatively and qualitatively. The linear model was used to establish the relationship between crater morphology indices and mechanical properties, with model parameters determined by linear regression. Key findings include: (1) Fracture depth, cross-sectional area, and contour roundness are independent morphological indicators, serving as characteristic parameters for crater morphology, with qualitative and quantitative analyses showing consistency; (2) Post-classification linear fitting revealed statistically significant morphological prediction models, though patterns varied across rock categories due to inherent properties like structure and grain homogeneity; (3) Classification by specific energy revealed distinct mechanical and morphological differences, with significant linear relationships established for all three indicators in Classes II and III, but only roundness showing significance in Class I (non-significant for cross-sectional area and depth). However, all significant models exhibited limited explanatory power (R2 = 0.220–0.635), likely due to constrained sample sizes. Future studies should expand sample sizes to refine these findings.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Wu, Z., Gao, H., Yang, Y., Tan, S., Fang, X., Hu, Y., & Duan, L. (2025). The Study on the Relation Between Rock Indentation Crater Morphology and Rock Mechanical Index Based on Indentation Experiments. Applied Sciences, 15(17), 9410. https://doi.org/10.3390/app15179410
Vancouver
Wu Z, Gao H, Yang Y, Tan S, Fang X, Hu Y, et al. The Study on the Relation Between Rock Indentation Crater Morphology and Rock Mechanical Index Based on Indentation Experiments. Applied Sciences. 2025;15(17):9410. doi:10.3390/app15179410
BibTeX
@article{Wu2025,
author = {Wu, Zhenkun and Gao, Hui and Yang, Ying and Tan, Songcheng and Fang, Xiaohong and Hu, Yule and Duan, Longchen},
title = {The Study on the Relation Between Rock Indentation Crater Morphology and Rock Mechanical Index Based on Indentation Experiments},
journal = {Applied Sciences},
year = {2025},
volume = {15},
number = {17},
pages = {9410},
doi = {10.3390/app15179410}
}
EUVIMED