EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of an SAR-Assisted Offset-Calibrated Chopper CFIA for High-Precision 4–20 mA Transmitter Front Ends

Jian Ren, Yiqun Niu, Bin Liu, Meng Li, Yansong Bai, Yuang Chen

Applied Sciences · 18.08.2025 · 15 (16) · 9084

DOI: 10.3390/app15169084 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 18.08.2025. Verfasst von Jian Ren und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In loop-powered 4–20 mA transmitter systems, sensors like temperature, pressure, flow, and gas sensors are chosen based on specific application requirements. These systems are widely adopted in high-precision measurement scenarios, including industrial automation, process control, and environmental monitoring. The transmitter requires a high-performance analog front end (AFE) for precise amplification and signal conditioning. This paper presents a low-noise instrumentation amplifier (IA) for high-precision transmitter front ends, featuring a Successive Approximation Register (SAR)-assisted offset calibration architecture. The proposed structure integrates a chopper current-feedback instrumentation amplifier (CFIA) with an automatic offset calibration loop (AOCL), significantly suppressing internal offset errors and enabling high-accuracy signal acquisition under stringent power and environmental temperature constraints. The designed amplifier provides four selectable gain settings, covering a range from ×32 to ×256. Fabricated in a 0.18 μm CMOS process, the CFIA operates at a 1.8 V supply voltage, consumes a static current of 182 μA, and achieves an input-referred noise as low as 20.28 nV/√Hz at 1 kHz, with a common-mode rejection ratio (CMRR) up to 122 dB and a power-supply rejection ratio (PSRR) up to 117 dB. Experimental results demonstrate that the proposed amplifier exhibits excellent performance in terms of input-referred noise, offset voltage, PSRR, and CMRR, making it well-suited for front-end detection in field instruments that require direct interfacing with measured media.

Zitieren

APA

Ren, J., Niu, Y., Liu, B., Li, M., Bai, Y., & Chen, Y. (2025). Design of an SAR-Assisted Offset-Calibrated Chopper CFIA for High-Precision 4–20 mA Transmitter Front Ends. Applied Sciences, 15(16), 9084. https://doi.org/10.3390/app15169084

Vancouver

Ren J, Niu Y, Liu B, Li M, Bai Y, Chen Y. Design of an SAR-Assisted Offset-Calibrated Chopper CFIA for High-Precision 4–20 mA Transmitter Front Ends. Applied Sciences. 2025;15(16):9084. doi:10.3390/app15169084

BibTeX
@article{Ren2025,
  author = {Ren, Jian and Niu, Yiqun and Liu, Bin and Li, Meng and Bai, Yansong and Chen, Yuang},
  title = {Design of an SAR-Assisted Offset-Calibrated Chopper CFIA for High-Precision 4–20 mA Transmitter Front Ends},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {16},
  pages = {9084},
  doi = {10.3390/app15169084}
}
Kostenlos starten →