Enhancing Wire Arc Additive Manufacturing for Maritime Applications: Overcoming Operational Challenges in Marine and Offshore Environments
Applied Sciences · 18.08.2025 · 15 (16) · 9070
DOI: 10.3390/app15169070 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 18.08.2025. Verfasst von Pavlenko Petro und 8 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 118 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Talent Introduction Science Foundation of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Wire Arc Additive Manufacturing holds promise for on-board metal part production in maritime settings, yet its implementation remains limited due to the vibrational instability inherent to shipborne environments. This study addresses this critical technological barrier by analyzing the effects of marine vibrations on process stability and proposing an integrated solution based on adaptive process control, gyrostabilized platforms, and real-time monitoring systems. The research establishes specific technical requirements for WAAM instrumentation under maritime conditions and evaluates the capabilities and limitations of existing hardware and software tools. A set of engineering recommendations is presented for improving digital modeling, thermal–mechanical monitoring, and feedback control systems. Additionally, the study highlights material-related challenges by examining the influence of alloy properties on print quality under dynamic loads. The proposed approach enhances WAAM process resilience, laying the groundwork for reliable, high-quality additive manufacturing at sea. These findings are particularly relevant to shipboard maintenance, repair, and remote fabrication tasks, marking a significant step toward the industrial adoption of WAAM in marine engineering.
Förderung
- National Talent Introduction Science Foundation of China
- National Natural Science Foundation of China
Zitieren
APA
Petro, P., Shi, X., Wang, J., Li, Z., Yin, B., Zhou, H., Zhou, Y., Yu, B., & Wang, Z. (2025). Enhancing Wire Arc Additive Manufacturing for Maritime Applications: Overcoming Operational Challenges in Marine and Offshore Environments. Applied Sciences, 15(16), 9070. https://doi.org/10.3390/app15169070
Vancouver
Petro P, Shi X, Wang J, Li Z, Yin B, Zhou H, et al. Enhancing Wire Arc Additive Manufacturing for Maritime Applications: Overcoming Operational Challenges in Marine and Offshore Environments. Applied Sciences. 2025;15(16):9070. doi:10.3390/app15169070
BibTeX
@article{Petro2025,
author = {Petro, Pavlenko and Shi, Xuezhi and Wang, Jinbao and Li, Zhenhua and Yin, Bo and Zhou, Hanxiang and Zhou, Yuxin and Yu, Bojian and Wang, Zhun},
title = {Enhancing Wire Arc Additive Manufacturing for Maritime Applications: Overcoming Operational Challenges in Marine and Offshore Environments},
journal = {Applied Sciences},
year = {2025},
volume = {15},
number = {16},
pages = {9070},
doi = {10.3390/app15169070}
}
EUVIMED