EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Dust Spray Parameters for Simulated LiDAR Sensor Contamination in Autonomous Vehicles Using a Face-Centered Composite Design

Sungho Son, Hyunmi Lee, Jiwoong Yang, Jungki Lee, Jeongah Jang, Charyung Kim, Joonho Jun, Hyungwon Park, Sunyoung Park, Woongsu Lee

Applied Sciences · 05.08.2025 · 15 (15) · 8651

DOI: 10.3390/app15158651 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 05.08.2025. Verfasst von Sungho Son und 9 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Agency for Infrastructure Technology Advancement (KAIA), Ministry of Land, Infrastructure and Transport.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Light detection and ranging (LiDAR) provides three-dimensional environmental information that is critical for maintaining the safety and reliability of autonomous driving systems. However, dust accumulation on the LiDAR window can cause detection errors and degrade performance. This study determined the optimal spray conditions for accumulating dust to evaluate LiDAR sensor cleaning performance. A primary optimization experiment using spray pressure, spray speed, spray distance, and the number of sprays as variables showed that spray pressure and number of sprays had the most significant influence on the kinetic energy and distribution of dust particles. Notably, the interaction between spray distance and number of sprays—related to curvature effects—was identified as a key variable increasing process sensitivity. A supplementary experiment, which added spray angle as a variable, indicated that while spray pressure remained the most significant factor, spray angle and number of sprays had an indirect influence through interaction terms. Both experiments used the same response variable (point cloud data) interactions to stepwise analyze particle transfer and spatial diffusion. The resulting optimal conditions offer a standard basis for evaluating LiDAR cleaning performance and may help improve cleaning efficiency and maintenance strategies.

Förderung

  • Korea Agency for Infrastructure Technology Advancement (KAIA)
  • Ministry of Land, Infrastructure and Transport

Zitieren

APA

Son, S., Lee, H., Yang, J., Lee, J., Jang, J., Kim, C., Jun, J., Park, H., Park, S., & Lee, W. (2025). Optimization of Dust Spray Parameters for Simulated LiDAR Sensor Contamination in Autonomous Vehicles Using a Face-Centered Composite Design. Applied Sciences, 15(15), 8651. https://doi.org/10.3390/app15158651

Vancouver

Son S, Lee H, Yang J, Lee J, Jang J, Kim C, et al. Optimization of Dust Spray Parameters for Simulated LiDAR Sensor Contamination in Autonomous Vehicles Using a Face-Centered Composite Design. Applied Sciences. 2025;15(15):8651. doi:10.3390/app15158651

BibTeX
@article{Son2025,
  author = {Son, Sungho and Lee, Hyunmi and Yang, Jiwoong and Lee, Jungki and Jang, Jeongah and Kim, Charyung and Jun, Joonho and Park, Hyungwon and Park, Sunyoung and Lee, Woongsu},
  title = {Optimization of Dust Spray Parameters for Simulated LiDAR Sensor Contamination in Autonomous Vehicles Using a Face-Centered Composite Design},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {15},
  pages = {8651},
  doi = {10.3390/app15158651}
}
Kostenlos starten →