EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Friction Stir Welding Process Using a Manual Tool on Polylactic Acid Structures Manufactured by Additive Techniques

Miguel Ángel Almazán, Marta Marín, Juan Antonio Almazán, Amabel García-Domínguez, Eva María Rubio

Applied Sciences · 22.07.2025 · 15 (15) · 8155

DOI: 10.3390/app15158155 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 22.07.2025. Verfasst von Miguel Ángel Almazán und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study analyses the application of the Friction Stir Welding (FSW) process on polymeric materials manufactured by additive manufacturing (AM), specifically with polylactic acid (PLA). FSW is a solid-state welding process characterized by its low heat input and minimal distortion, which makes it ideal for the assembly of complex or large components made by additive manufacturing. To evaluate its effectiveness, a portable FSW device was developed for the purpose of joining PLA specimens made by AM using different filler densities (15% and 100%). Two tool geometries (a cylindrical and truncated cone) were utilized by varying the parameters of rotational speed, tilt angle, and feed rate. The results revealed two different process stages, transient and steady-state, and showed differences in weld quality depending on the material density, tool type, and material addition. The study confirms the viability of FSW for joining PLA parts made by AM and suggests potential applications in industries that require robust and precise joints in plastic parts, thereby helping hybrid manufacturing to progress.

Zitieren

APA

Almazán, M. Á., Marín, M., Almazán, J. A., García-Domínguez, A., & Rubio, E. M. (2025). Friction Stir Welding Process Using a Manual Tool on Polylactic Acid Structures Manufactured by Additive Techniques. Applied Sciences, 15(15), 8155. https://doi.org/10.3390/app15158155

Vancouver

Almazán MÁ, Marín M, Almazán JA, García-Domínguez A, Rubio EM. Friction Stir Welding Process Using a Manual Tool on Polylactic Acid Structures Manufactured by Additive Techniques. Applied Sciences. 2025;15(15):8155. doi:10.3390/app15158155

BibTeX
@article{Almazn2025,
  author = {Almazán, Miguel Ángel and Marín, Marta and Almazán, Juan Antonio and García-Domínguez, Amabel and Rubio, Eva María},
  title = {Friction Stir Welding Process Using a Manual Tool on Polylactic Acid Structures Manufactured by Additive Techniques},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {15},
  pages = {8155},
  doi = {10.3390/app15158155}
}
Kostenlos starten →