Machine Learning-Driven Optimization of Machining Parameters Optimization for Cutting Forces and Surface Roughness in Micro-Milling of AlSi10Mg Produced by Powder Bed Fusion Additive Manufacturing
Applied Sciences · 10.06.2025 · 15 (12) · 6553
DOI: 10.3390/app15126553 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 10.06.2025. Verfasst von Zihni Alp Cevik und 3 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study focuses on optimizing machining parameters in the micro-milling of AlSi10Mg aluminum alloy produced via the powder bed fusion additive manufacturing process. Although additive manufacturing enables complex geometries and minimizes material waste, challenges remain in reducing surface roughness and cutting forces during post-processing. Micro-milling experiments were conducted using spindle speeds up to 60,000 rpm, with varied feed rates and cutting depths. Cutting forces (Fx, Fy, and Fz) were measured using a Kistler-9119AA1 mini dynamometer, while surface roughness (Ra) was evaluated with a Nanovea-ST400 3D optical profilometer. Five advanced machine learning models, random forest regressor (RFR), gradient boosting regressor (GBR), LightGBM, CatBoost, and k-nearest neighbors (KNN), were employed to predict cutting forces and surface roughness, with CatBoost achieving the highest predictive accuracy (R2 > 0.96). Among all models, CatBoost achieved the best predictive performance, with test R2 values exceeding 0.96 for both force and Ra estimations. Experimental and ML-based results demonstrated that higher feed rates and depths of cut increased cutting forces, particularly in the Fx direction, while elevated spindle speeds reduced forces due to thermal softening. Surface roughness was minimized at lower feed rates and higher spindle speeds. The optimal machining conditions for achieving Ra < 1 µm were identified as ap = 50 µm, n = 30,000 rpm, and fz = 0.25 µm/tooth. This integrated approach supports precision machining of AM aluminum alloys.
Zitieren
APA
Cevik, Z. A., Ozsoy, K., Ercetin, A., & Sariisik, G. (2025). Machine Learning-Driven Optimization of Machining Parameters Optimization for Cutting Forces and Surface Roughness in Micro-Milling of AlSi10Mg Produced by Powder Bed Fusion Additive Manufacturing. Applied Sciences, 15(12), 6553. https://doi.org/10.3390/app15126553
Vancouver
Cevik ZA, Ozsoy K, Ercetin A, Sariisik G. Machine Learning-Driven Optimization of Machining Parameters Optimization for Cutting Forces and Surface Roughness in Micro-Milling of AlSi10Mg Produced by Powder Bed Fusion Additive Manufacturing. Applied Sciences. 2025;15(12):6553. doi:10.3390/app15126553
BibTeX
@article{Cevik2025,
author = {Cevik, Zihni Alp and Ozsoy, Koray and Ercetin, Ali and Sariisik, Gencay},
title = {Machine Learning-Driven Optimization of Machining Parameters Optimization for Cutting Forces and Surface Roughness in Micro-Milling of AlSi10Mg Produced by Powder Bed Fusion Additive Manufacturing},
journal = {Applied Sciences},
year = {2025},
volume = {15},
number = {12},
pages = {6553},
doi = {10.3390/app15126553}
}
EUVIMED