The Effects of Cutting Pick Parameters on Cutting Head Performance in Tunneling–Bolting Combined Machines
Applied Sciences · 21.05.2025 · 15 (10) · 5746
DOI: 10.3390/app15105746 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, erschienen am 21.05.2025. Verfasst von Bo Ning und 2 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation, Guangzhou Basic and Applied Basic Research Project.
Abstract (Originalsprache)
This paper studies the influence of the pick structure on the cutting characteristics of the cutting head when cutting rocks with a tunneling–bolting combined machine. A simulated model of the breaking of soft rock with a cutting pick was established. Dynamic simulation of the cutting head during the cutting process enabled the force characteristics to be obtained. The validity of the simulation was verified by carrying out cutting experiments. A numerical simulation of the pick parameters made it possible to analyze the influence of the pick’s included angle, taper angle, and established angle on the cutting performance. The results showed that the average values for the cutting resistance and traction resistance when the cutting head cut rocks were 14.21 kN and 7.19 kN, respectively. An included angle of between 70° and 75° was found to be most suitable. Within a specific range, the cutting force was found to increase with an increase in the taper angle. An established angle between 40° and 45° proved to have the highest cutting efficiency. At present, the results have been applied to the Shendong Coalmine. Thus, the proposed model provides a sound theoretical basis for the optimal design of the cutting head.
Förderung
- National Natural Science Foundation of China
- Guangdong Basic and Applied Basic Research Foundation
- Guangzhou Basic and Applied Basic Research Project
Zitieren
APA
Ning, B., Li, M., & Zhang, J. (2025). The Effects of Cutting Pick Parameters on Cutting Head Performance in Tunneling–Bolting Combined Machines. Applied Sciences. https://doi.org/10.3390/app15105746
Vancouver
Ning B, Li M, Zhang J. The Effects of Cutting Pick Parameters on Cutting Head Performance in Tunneling–Bolting Combined Machines. Applied Sciences. 2025. doi:10.3390/app15105746
BibTeX
@article{Ning2025,
author = {Ning, Bo and Li, Mingzhu and Zhang, Jinhua},
title = {The Effects of Cutting Pick Parameters on Cutting Head Performance in Tunneling–Bolting Combined Machines},
journal = {Applied Sciences},
year = {2025},
doi = {10.3390/app15105746}
}
EUVIMED