EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interfacial Shear Properties of Red Clay and Polyurethane with Different Densities

Feng Cheng, Xinran Zhang, Qingwang Li

Applied Sciences · 14.05.2025 · 15 (10) · 5501

DOI: 10.3390/app15105501 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 14.05.2025. Verfasst von Feng Cheng und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Key Research and Development Program, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyurethane reinforced slopes have been widely used in practical engineering, for the stability of the composite structure, the interfacial shear performance between polyurethane and soil plays a crucial role. This paper through the indoor interfacial shear test, study the relationship between shear displacement and shear stress at the polyurethane-red clay interface under the different polyurethane densities. At the same time, based on the bilinear finite element cohesive model, using ABAQUS finite element software to establish a numerical model of polyurethane-red clay composite specimens to simulate the indoor shear test process, and to study the shear stress and shear strength changes at the interface between polyurethane and red clay; verify the feasibility of the numerical model by comparative analysis. The test results show: The incorporation of polyurethane has a significant promoting effect on the interfacial shear strength, there is a linear positive correlation between the interfacial shear strength and the density of polyurethane; The shear strengths of the composites with densities of 0.2 g/cm3, 0.5 g/cm3, and 0.8 g/cm3 are 1.53 times, 1.60 times, and 2.24 times that of pure red clay respectively, the optimal polyurethane density is between 0.5 g/cm3–0.8 g/cm3; The bilinear finite element model can effectively simulate indoor shear tests, and the average error of the simulated shear strength result is within 9.4%, which provides an effective method for understanding the interfacial shear performance of the composite body.

Förderung

  • Guangxi Key Research and Development Program
  • National Natural Science Foundation of China

Zitieren

APA

Cheng, F., Zhang, X., & Li, Q. (2025). Interfacial Shear Properties of Red Clay and Polyurethane with Different Densities. Applied Sciences, 15(10), 5501. https://doi.org/10.3390/app15105501

Vancouver

Cheng F, Zhang X, Li Q. Interfacial Shear Properties of Red Clay and Polyurethane with Different Densities. Applied Sciences. 2025;15(10):5501. doi:10.3390/app15105501

BibTeX
@article{Cheng2025,
  author = {Cheng, Feng and Zhang, Xinran and Li, Qingwang},
  title = {Interfacial Shear Properties of Red Clay and Polyurethane with Different Densities},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {10},
  pages = {5501},
  doi = {10.3390/app15105501}
}
Kostenlos starten →