Numerical Analysis of the Effect of the Rock Particle Size on the Macroscopic Mechanical Properties Under Uniaxial Compression and Shearing
Applied Sciences · 28.04.2025 · 15 (9) · 4882
DOI: 10.3390/app15094882 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 28.04.2025. Verfasst von Chaoyi Yang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Hunan Provincial Natural Science Foundation of China, Guizhou Provincial Major Scientific and Technological Program.
Abstract (Originalsprache)
When the distribution characteristics of rock particles are unknown, obtaining reasonable particle size parameters through trial-and-error methods is time-consuming. Therefore, identifying a set of particle size parameters that can accurately reflect the macro-mechanical properties of rock is crucial. In this study, a series of uniaxial compression and direct shear tests were conducted on standard rock models with varying particle sizes and particle size ratios using the discrete element method (DEM). The results indicate that the uniaxial compressive strength, elastic modulus, and shear stiffness increase with decreasing particle size. Conversely, the uniaxial compressive strength, elastic modulus, and shear stiffness decrease as the particle size ratio increases. Based on the simulation results, the accuracy and reliability of numerical simulations can be ensured when the relative average particle size exceeds 50 and the particle size ratio is greater than 1.5. These findings can be applied to other similar numerical studies, thereby reducing the time required for parameter matching and enhancing the efficiency of scientific research.
Förderung
- National Natural Science Foundation of China
- Hunan Provincial Natural Science Foundation of China
- Guizhou Provincial Major Scientific and Technological Program
- Yunnan Province Science and Technology Plan Project
Zitieren
APA
Yang, C., Li, S., Feng, X., Li, Z., Ding, X., & Lin, H. (2025). Numerical Analysis of the Effect of the Rock Particle Size on the Macroscopic Mechanical Properties Under Uniaxial Compression and Shearing. Applied Sciences, 15(9), 4882. https://doi.org/10.3390/app15094882
Vancouver
Yang C, Li S, Feng X, Li Z, Ding X, Lin H. Numerical Analysis of the Effect of the Rock Particle Size on the Macroscopic Mechanical Properties Under Uniaxial Compression and Shearing. Applied Sciences. 2025;15(9):4882. doi:10.3390/app15094882
BibTeX
@article{Yang2025,
author = {Yang, Chaoyi and Li, Su and Feng, Xinglong and Li, Zhengrong and Ding, Xuran and Lin, Hang},
title = {Numerical Analysis of the Effect of the Rock Particle Size on the Macroscopic Mechanical Properties Under Uniaxial Compression and Shearing},
journal = {Applied Sciences},
year = {2025},
volume = {15},
number = {9},
pages = {4882},
doi = {10.3390/app15094882}
}
EUVIMED