EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Low-Melting-Point Alloys on High-Temperature Hydrolysis Hydrogen Production of Mg-Based Metals

Jianhua Ran, Zhigang Zeng, Zhifu Wang, Shiman Zhang, Lili Ma, Zhonghao Heng

Applied Sciences · 17.04.2025 · 15 (8) · 4437

DOI: 10.3390/app15084437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 17.04.2025. Verfasst von Jianhua Ran und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key R&D and Transformation Plan of Science and Technology Department of Qinghai Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogen (H2) production from magnesium and its alloys offers an efficient alternative to traditional methods. In magnesium-based hydrolysis, the formation of a Mg(OH)2 passivation layer significantly hinders the reaction, thereby reducing hydrogen production efficiency. To address this issue, increasing the reaction temperature and selecting appropriate materials are essential. This study adjusted the compositions of magnesium alloys (pure Mg, Mg-Al, Mg-Zn) to form low-melting phases (Mg17Al12 and Mg7Zn3). The results demonstrate that as-cast Mg-Al and Mg-Zn alloys exhibit faster reaction rates and lower critical temperatures compared to pure Mg. Specifically, Mg-30wt.% Al and Mg-30wt.% Zn show the fastest reaction rates, with hydrogen purity reaching 99%. Mg-Zn alloys have an induction time of merely 98 s and can achieve complete reaction at 300 °C, while Mg-Al alloys require 174 s and 420 °C. Pure Mg, on the other hand, requires 270 s and 520 °C. Therefore, regarding the critical reaction temperature, the Mg-Zn alloy requires the lowest critical reaction temperature, the Mg-Al alloy requires a moderate reaction temperature, and pure Mg requires the highest critical reaction temperature. In addition, in terms of the performance of hydrogen production through hydrolysis, compared with pure Mg, Mg-30wt.%Al, Mg-20wt.%Zn, and Mg-30wt.%Zn all exhibit good hydrogen production performance through hydrolysis. Their final conversion rates are all higher than that of pure Mg. Among them, Mg-30wt.%Zn has the most excellent hydrogen production performance, followed by Mg-30wt.%Al. The specific conclusions will be analyzed and discussed in detail in the subsequent text.

Förderung

  • Key R&D and Transformation Plan of Science and Technology Department of Qinghai Province

Zitieren

APA

Ran, J., Zeng, Z., Wang, Z., Zhang, S., Ma, L., & Heng, Z. (2025). Effect of Low-Melting-Point Alloys on High-Temperature Hydrolysis Hydrogen Production of Mg-Based Metals. Applied Sciences, 15(8), 4437. https://doi.org/10.3390/app15084437

Vancouver

Ran J, Zeng Z, Wang Z, Zhang S, Ma L, Heng Z. Effect of Low-Melting-Point Alloys on High-Temperature Hydrolysis Hydrogen Production of Mg-Based Metals. Applied Sciences. 2025;15(8):4437. doi:10.3390/app15084437

BibTeX
@article{Ran2025,
  author = {Ran, Jianhua and Zeng, Zhigang and Wang, Zhifu and Zhang, Shiman and Ma, Lili and Heng, Zhonghao},
  title = {Effect of Low-Melting-Point Alloys on High-Temperature Hydrolysis Hydrogen Production of Mg-Based Metals},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {8},
  pages = {4437},
  doi = {10.3390/app15084437}
}
Kostenlos starten →