EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polymer-Derived SiOC Ceramics by Digital Light Processing-Based Additive Manufacturing

Xing Zhao, Jing Li, Ning Li, Lai Wei, Lin Zhang, Shuai Zhang, Haile Lei

Applied Sciences · 07.03.2025 · 15 (6) · 2921

DOI: 10.3390/app15062921 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 07.03.2025. Verfasst von Xing Zhao und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer-derived SiOC ceramics (PDCs-SiOC) possess advantages such as high temperature resistance, oxidation resistance, corrosion resistance, and customizable mechanical and dielectric properties. These attributes make them a promising material for high-temperature structural and functional applications. Based on polymer-derived ceramic conversion technology, this study synthesized a photosensitive resin with high ceramic yield and low shrinkage from commercial MK resin, 3-(trimethoxysilyl) propyl methacrylate, and trimethylolpropane triacrylate monomer. Using digital light processing additive manufacturing technology, 3D diamond-structured SiOC ceramic and 3D octahedron-structured SiOC ceramic with high precision were fabricated. The pyrolysis of both structures at different temperatures (1000 °C to 1400 °C) yielded SiOC ceramics, which exhibited uniform shrinkage in all directions, with a linear shrinkage rate ranging from 31% to 36%. The microstructure was characterized by FTIR, XRD, and SEM, respectively. Additionally, the compressive strength and elastic modulus of the three-dimensional SiOC ceramics were studied. The SiOC ceramic diamond lattice structure, fabricated through pyrolysis at 1200 °C, demonstrated good mechanical properties with a geometric density of 0.76 g/cm³. Its compressive strength and elastic modulus were measured at 7.66 MPa and 1.47 GPa, respectively. This study offers valuable insights into the rapid and customized manufacturing of lightweight ceramic structures.

Zitieren

APA

Zhao, X., Li, J., Li, N., Wei, L., Zhang, L., Zhang, S., & Lei, H. (2025). Polymer-Derived SiOC Ceramics by Digital Light Processing-Based Additive Manufacturing. Applied Sciences, 15(6), 2921. https://doi.org/10.3390/app15062921

Vancouver

Zhao X, Li J, Li N, Wei L, Zhang L, Zhang S, et al. Polymer-Derived SiOC Ceramics by Digital Light Processing-Based Additive Manufacturing. Applied Sciences. 2025;15(6):2921. doi:10.3390/app15062921

BibTeX
@article{Zhao2025,
  author = {Zhao, Xing and Li, Jing and Li, Ning and Wei, Lai and Zhang, Lin and Zhang, Shuai and Lei, Haile},
  title = {Polymer-Derived SiOC Ceramics by Digital Light Processing-Based Additive Manufacturing},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {6},
  pages = {2921},
  doi = {10.3390/app15062921}
}
Kostenlos starten →