Effect of Axial Modification on the Meshing Performance of Involute Beveloid Gear Pair
Applied Sciences · 27.01.2025 · 15 (3) · 1321
DOI: 10.3390/app15031321 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 27.01.2025. Verfasst von Yongping Liu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Lanzhou Youth Talent Science and Technology Innovation Project, Key Research and Development Plan of Gansu Province.
Abstract (Originalsprache)
In order to enhance the load-bearing capacity of the involute beveloid gear pair, this study proposes research on improving the contact stress through axial modification. Under the condition of segmented parabolic axial modification, the mathematical equation for the tooth flank of the beveloid gear is derived. A simulation meshing model for the beveloid gear pair is constructed to investigate the effects of different amounts and lengths of axial modification on the meshing performance, changes in flank and root stress, and transmission error before and after modification. The results indicate that as the modification amount increases, the maximum equivalent stress initially decreases and then exhibits a tendency towards stability. Moreover, an increase in modification length concentrates the contact zone towards the middle of the tooth flank while expanding the range of tooth root stress distribution, and it also leads to a decrease in maximum equivalent stress. The implementation of the modification has been observed to result in a reduction in cumulative transmission error and an effective reduction in edge load on the beveloid gear pair, which has been demonstrated to enhance the bearing capacity and transmission stability extension while also impacting the dynamic meshing performance.
Förderung
- National Natural Science Foundation of China
- Lanzhou Youth Talent Science and Technology Innovation Project
- Key Research and Development Plan of Gansu Province
- Youth Science Foundation of Gansu Province
- Education Department of Gansu Province: University Teachers Innovation Fund
- Wenzhou Municipal Basic Scientific Research Project of China
Zitieren
APA
Liu, Y., Chen, Q., & Dong, C. (2025). Effect of Axial Modification on the Meshing Performance of Involute Beveloid Gear Pair. Applied Sciences, 15(3), 1321. https://doi.org/10.3390/app15031321
Vancouver
Liu Y, Chen Q, Dong C. Effect of Axial Modification on the Meshing Performance of Involute Beveloid Gear Pair. Applied Sciences. 2025;15(3):1321. doi:10.3390/app15031321
BibTeX
@article{Liu2025,
author = {Liu, Yongping and Chen, Qi and Dong, Changbin},
title = {Effect of Axial Modification on the Meshing Performance of Involute Beveloid Gear Pair},
journal = {Applied Sciences},
year = {2025},
volume = {15},
number = {3},
pages = {1321},
doi = {10.3390/app15031321}
}
EUVIMED