EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mesh Stiffness and Dynamic Modeling and Analysis of Modified Straight Bevel Gears

Ding Zhang, Ze-Hua Hu, Wen-Tao Liu, Jin-Yuan Tang, Zhou Sun, Zhao-Yang Tian

Applied Sciences · 19.12.2024 · 14 (24) · 11919

DOI: 10.3390/app142411919 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 19.12.2024. Verfasst von Ding Zhang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China (NSFC), Hunan Provincial Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gear modification, which involves the removal of material from the theoretical surface to improve the contact characteristics of the gear face, is widely applied in gear vibration reduction and noise optimization design. This paper establishes a dynamic model of the straight bevel gear (SBG) transmission system to accurately and efficiently evaluate the effects of different modification strategies on the vibrational characteristics of SBGs. Initially, the time-varying meshing stiffness (TVMS) of standard SBGs was calculated, and methods such as the slicing method and deformation coordination equations were used to calculate the TVMS under tooth profile modification (TPM), Lead crown relief (LCR), and comprehensive modification (CM), which were then validated against finite element method (FEM) calculations. Subsequently, taking into account the impact of time-varying meshing point vectors and the degree of contact overlap, a finite element node dynamic model of the SBG transmission system was established. Finally, by comparing the dynamic characteristics under different modification conditions, the study further elucidates that selecting the appropriate modification method and amount according to different service scenarios is an effective means to suppress gear transmission vibration. This research provides a theoretical basis for the design of gear modification and vibration control for SBGs.

Förderung

  • National Natural Science Foundation of China (NSFC)
  • Hunan Provincial Natural Science Foundation of China

Zitieren

APA

Zhang, D., Hu, Z., Liu, W., Tang, J., Sun, Z., & Tian, Z. (2024). Mesh Stiffness and Dynamic Modeling and Analysis of Modified Straight Bevel Gears. Applied Sciences, 14(24), 11919. https://doi.org/10.3390/app142411919

Vancouver

Zhang D, Hu Z, Liu W, Tang J, Sun Z, Tian Z. Mesh Stiffness and Dynamic Modeling and Analysis of Modified Straight Bevel Gears. Applied Sciences. 2024;14(24):11919. doi:10.3390/app142411919

BibTeX
@article{Zhang2024,
  author = {Zhang, Ding and Hu, Ze-Hua and Liu, Wen-Tao and Tang, Jin-Yuan and Sun, Zhou and Tian, Zhao-Yang},
  title = {Mesh Stiffness and Dynamic Modeling and Analysis of Modified Straight Bevel Gears},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {24},
  pages = {11919},
  doi = {10.3390/app142411919}
}
Kostenlos starten →