EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structure and Strength Optimization of the Bogdan ERCV27 Electric Garbage Truck Spatial Frame Under Static Loading

Kostyantyn Holenko, Oleksandr Dykha, Eugeniusz Koda, Ivan Kernytskyy, Orest Horbay, Yuriy Royko, Yevhen Fornalchyk, Oksana Berezovetska, Vasyl Rys, Ruslan Humenuyk, Serhii Berezovetskyi, Mariusz Żółtowski und 4 weitere

Applied Sciences · 27.11.2024 · 14 (23) · 11012

DOI: 10.3390/app142311012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 27.11.2024. Verfasst von Kostyantyn Holenko und 15 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Taking into account the requirements to reduce the release of harmful emissions into the environment, the EU’s environmental standards when transitioning to the Euro 7 standard in 2025 will actually lead vehicles having to operate without producing emissions in all driving situations. Carmakers believe that the new, much stricter regulations will mark the end of the internal combustion engine era. For example, in 2030, the manufacturer SEAT will cease its activities, leaving behind the Cupra brand, which will be exclusively electric in the future. This trend will apply not only to private vehicles (passenger cars), but also to utility vehicles, which is the subject of our research, namely the spatial tubular frame in the Bogdan ERCV27 garbage truck, presented in the form of a solid model. The peculiarity of the studied model is the installation of a battery block behind the driver’s cabin, causing an additional load to be placed on the spatial frame of the garbage truck, which in terms of its architecture is more like the body of a bus. During the conditions involving various modes of operation of a full-scale Bogdan ERCV27 garbage truck sample, questions about the strength and uniformity of its load-bearing spatial frame inevitably arise, which are decisive, even at the stage of designing and preparing the technical documentation. The main static load mode, which, despite its name, also covers dynamic conditions, was modeled using the appropriate coefficient kd = 2.0. The maximum stresses on the model during the “bending” mode were 381.13 MPa before structure optimization and 270.5 MPa as a result of the improvement measures. The spatial frame mass was reduced by 4.13%. During the “torsion” mode, the maximum deformation values were 12.1–14.5 mm, which guarantees the normal operation of the aggregates and units of the truck.

Zitieren

APA

Holenko, K., Dykha, O., Koda, E., Kernytskyy, I., Horbay, O., Royko, Y., Fornalchyk, Y., Berezovetska, O., Rys, V., Humenuyk, R., Berezovetskyi, S., Żółtowski, M., Baryłka, A., Markiewicz, A., Wierzbicki, T., & Bayat, H. (2024). Structure and Strength Optimization of the Bogdan ERCV27 Electric Garbage Truck Spatial Frame Under Static Loading. Applied Sciences, 14(23), 11012. https://doi.org/10.3390/app142311012

Vancouver

Holenko K, Dykha O, Koda E, Kernytskyy I, Horbay O, Royko Y, et al. Structure and Strength Optimization of the Bogdan ERCV27 Electric Garbage Truck Spatial Frame Under Static Loading. Applied Sciences. 2024;14(23):11012. doi:10.3390/app142311012

BibTeX
@article{Holenko2024,
  author = {Holenko, Kostyantyn and Dykha, Oleksandr and Koda, Eugeniusz and Kernytskyy, Ivan and Horbay, Orest and Royko, Yuriy and Fornalchyk, Yevhen and Berezovetska, Oksana and Rys, Vasyl and Humenuyk, Ruslan and Berezovetskyi, Serhii and Żółtowski, Mariusz and Baryłka, Adam and Markiewicz, Anna and Wierzbicki, Tomasz and Bayat, Hydayatullah},
  title = {Structure and Strength Optimization of the Bogdan ERCV27 Electric Garbage Truck Spatial Frame Under Static Loading},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {23},
  pages = {11012},
  doi = {10.3390/app142311012}
}
Kostenlos starten →