Multi-Objective Optimization Study on Production of AlSi10Mg Alloy by Laser Powder Bed Fusion
Applied Sciences · 17.11.2024 · 14 (22) · 10584
DOI: 10.3390/app142210584 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 17.11.2024. Verfasst von İnayet Burcu Toprak und 1 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In additive manufacturing, production parameters play a critical role in the microstructure, mechanical properties, and surface quality of a product. The correct selection of these parameters is of great importance for the success of the production process. In this study, the aim was to improve product quality in the additive manufacturing of an AlSi10Mg alloy. The experiments were conducted using a full factorial design, with a constant layer thickness of 0.04 mm. The production parameters included two laser powers (200 and 275 W), two scanning speeds (800 and 1400 mm/s), and two hatch distances (0.08 and 0.14 mm). The performance properties of the produced parts were evaluated according to the relative density and surface roughness criteria. The TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) method was used to optimize both relative density and surface roughness performances simultaneously. The results revealed that the most suitable production parameters for the additive manufacturing of the AlSi10Mg alloy were 275 W laser power, 0.14 mm hatch distance, and 800 mm/s scan speed.
Zitieren
APA
Toprak, İ. B., & Dogdu, N. (2024). Multi-Objective Optimization Study on Production of AlSi10Mg Alloy by Laser Powder Bed Fusion. Applied Sciences, 14(22), 10584. https://doi.org/10.3390/app142210584
Vancouver
Toprak İB, Dogdu N. Multi-Objective Optimization Study on Production of AlSi10Mg Alloy by Laser Powder Bed Fusion. Applied Sciences. 2024;14(22):10584. doi:10.3390/app142210584
BibTeX
@article{Toprak2024,
author = {Toprak, İnayet Burcu and Dogdu, Nafel},
title = {Multi-Objective Optimization Study on Production of AlSi10Mg Alloy by Laser Powder Bed Fusion},
journal = {Applied Sciences},
year = {2024},
volume = {14},
number = {22},
pages = {10584},
doi = {10.3390/app142210584}
}
EUVIMED