EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Evaluation of the Effect of Fuel Injection on the Performance and Emission Characteristics of a Diesel Engine Fueled with Plastic-Oil–Hydrogen–Diesel Blends

Kodandapuram Jayasimha Reddy, Gaddale Amba Prasad Rao, Reddygari Meenakshi Reddy, Upendra Rajak

Applied Sciences · 26.07.2024 · 14 (15) · 6539

DOI: 10.3390/app14156539 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 26.07.2024. Verfasst von Kodandapuram Jayasimha Reddy und 3 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fuelled engines serve as prime movers in low-, medium-, and heavy-duty applications with high thermal diesel efficiency and good fuel economy compared to their counterpart, spark ignition engines. In recent years, diesel engines have undergone a multitude of developments, however, diesel engines release high levels of NOx, smoke, carbon monoxide [CO], and hydrocarbon [HC] emissions. Due to the exponential growth in fleet population, there is a severe burden caused by petroleum-derived fuels. To tackle both fuel and pollution issues, the research community has developed strategies to use economically viable alternative fuels. The present experimental investigations deal with the use of blends of biodiesel prepared from waste plastic oil [P] and petro-diesel [D], and, to improve its performance, hydrogen [H] is added in small amounts. Further, advanced injection timings have been adopted [17.5° to 25.5° b TDC (before top dead centre)] to study their effect on harmful emissions. Hydrogen energy shares vary from 5 to 15%, maintaining a biodiesel proportion of 20%, and the remaining is petro-diesel. Thus, the adopted blends are DP20 ((diesel fuel (80%) and waste plastic biofuel (20%)), DP20H5 (DP20 (95%) and hydrogen (5%)), DP20H10 (DP20 (90%) and hydrogen (10%)), and DP20H15 (DP20 (85%) and hydrogen (15%)). The experiments were conducted at constant speeds with a rated injection pressure of 220 bar and a rated compression ratio of 18. The increase in the share of hydrogen led to a considerable improvement in the performance. Under full load conditions, with advanced injection timings, the brake-specific fuel consumption had significantly decreased and NOx emissions increased.

Zitieren

APA

Reddy, K. J., Rao, G. A. P., Reddy, R. M., & Rajak, U. (2024). An Evaluation of the Effect of Fuel Injection on the Performance and Emission Characteristics of a Diesel Engine Fueled with Plastic-Oil–Hydrogen–Diesel Blends. Applied Sciences, 14(15), 6539. https://doi.org/10.3390/app14156539

Vancouver

Reddy KJ, Rao GAP, Reddy RM, Rajak U. An Evaluation of the Effect of Fuel Injection on the Performance and Emission Characteristics of a Diesel Engine Fueled with Plastic-Oil–Hydrogen–Diesel Blends. Applied Sciences. 2024;14(15):6539. doi:10.3390/app14156539

BibTeX
@article{Reddy2024,
  author = {Reddy, Kodandapuram Jayasimha and Rao, Gaddale Amba Prasad and Reddy, Reddygari Meenakshi and Rajak, Upendra},
  title = {An Evaluation of the Effect of Fuel Injection on the Performance and Emission Characteristics of a Diesel Engine Fueled with Plastic-Oil–Hydrogen–Diesel Blends},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {15},
  pages = {6539},
  doi = {10.3390/app14156539}
}
Kostenlos starten →