EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Mode-Switching Quality of Hybrid Tractor Equipped with HMCVT

Zhen Zhu, Jie Sheng, Hongwei Zhang, Dehai Wang, Long Chen

Applied Sciences · 19.07.2024 · 14 (14) · 6288

DOI: 10.3390/app14146288 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 19.07.2024. Verfasst von Zhen Zhu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation, Open Foundation of the National Key Laboratory of Special Vehicle Design and Manufacturing Integration Technology, Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During the mode-switching process of a hybrid tractor equipped with a hydraulic-mechanical continuously variable transmission (HMCVT) device, the separation and combination of the clutch will cause transient shocks, affecting the smoothness and driving comfort of the entire vehicle. This article conducts simulation and experimental research on the impact problem when switching from pure electric drive mode to hybrid-power speed coupling mode. Firstly, establish a system dynamics model in SimulationX 3.5 software and build a hardware-in-the-loop (HIL) experimental platform. Secondly, a strategy of “clutch oil pressure fuzzy control + motor torque compensation” is proposed to solve the problem of the slow dynamic response of the engine. Finally, the orthogonal experiment range analysis method and variance analysis method are used to optimize the quality of mode switching, with six clutch-switching time sequences as experimental factors. The simulation results show that adopting the strategy of “clutch oil pressure fuzzy control + motor torque compensation” and optimizing the clutch-switching timing can effectively reduce the amplitude of output shaft speed reduction, dynamic load coefficient, and impact, and shorten the switching time. The comparison between the HIL test results and the simulation results shows that there is a certain difference between the two, but the overall trend is consistent, which verifies the effectiveness of the proposed control strategy and method.

Förderung

  • China Postdoctoral Science Foundation
  • Open Foundation of the National Key Laboratory of Special Vehicle Design and Manufacturing Integration Technology
  • Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems
  • National Natural Science Foundation of China

Zitieren

APA

Zhu, Z., Sheng, J., Zhang, H., Wang, D., & Chen, L. (2024). Optimization of Mode-Switching Quality of Hybrid Tractor Equipped with HMCVT. Applied Sciences, 14(14), 6288. https://doi.org/10.3390/app14146288

Vancouver

Zhu Z, Sheng J, Zhang H, Wang D, Chen L. Optimization of Mode-Switching Quality of Hybrid Tractor Equipped with HMCVT. Applied Sciences. 2024;14(14):6288. doi:10.3390/app14146288

BibTeX
@article{Zhu2024,
  author = {Zhu, Zhen and Sheng, Jie and Zhang, Hongwei and Wang, Dehai and Chen, Long},
  title = {Optimization of Mode-Switching Quality of Hybrid Tractor Equipped with HMCVT},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {14},
  pages = {6288},
  doi = {10.3390/app14146288}
}
Kostenlos starten →