EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling and Prediction of Surface Roughness in Hybrid Manufacturing–Milling after FDM Using Artificial Neural Networks

Strahinja Djurović, Dragan Lazarević, Bogdan Ćirković, Milan Mišić, Milan Ivković, Bojan Stojčetović, Martina Petković, Aleksandar Ašonja

Applied Sciences · 09.07.2024 · 14 (14) · 5980

DOI: 10.3390/app14145980 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 09.07.2024. Verfasst von Strahinja Djurović und 7 weiteren Autor:innen. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional printing, or additive manufacturing, represents one of the fastest growing branches of the industry, and fused deposition modeling (FDM) is one of most frequently used technologies. Three-dimensional printing does not provide high-quality surfaces, so finishing is required, and milling is one of the best methods for improving surface quality. The combination of 3D printing and traditional manufacturing technologies is known as hybrid manufacturing. In order to improve quality and determine optimal machining parameters, researchers increasingly use artificial intelligence methods. In the context of manufacturing technologies, both multiple regression analysis (MRA) and artificial neural networks (ANNs) have proven to be highly reliable in predicting and optimizing machining processes. This study focuses on the use of MRA and an ANN to analyze the influence of machining parameters such as feed rate, depth of cut, and spindle speed on the surface roughness of a 3D-printed part in a milling process. The study compares the measured results with the outcomes obtained through MRA and the ANN to assess their effectiveness in predicting and optimizing surface roughness. The results show that higher accuracy was obtained from the ANN method.

Zitieren

APA

Djurović, S., Lazarević, D., Ćirković, B., Mišić, M., Ivković, M., Stojčetović, B., Petković, M., & Ašonja, A. (2024). Modeling and Prediction of Surface Roughness in Hybrid Manufacturing–Milling after FDM Using Artificial Neural Networks. Applied Sciences, 14(14), 5980. https://doi.org/10.3390/app14145980

Vancouver

Djurović S, Lazarević D, Ćirković B, Mišić M, Ivković M, Stojčetović B, et al. Modeling and Prediction of Surface Roughness in Hybrid Manufacturing–Milling after FDM Using Artificial Neural Networks. Applied Sciences. 2024;14(14):5980. doi:10.3390/app14145980

BibTeX
@article{Djurovi2024,
  author = {Djurović, Strahinja and Lazarević, Dragan and Ćirković, Bogdan and Mišić, Milan and Ivković, Milan and Stojčetović, Bojan and Petković, Martina and Ašonja, Aleksandar},
  title = {Modeling and Prediction of Surface Roughness in Hybrid Manufacturing–Milling after FDM Using Artificial Neural Networks},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {14},
  pages = {5980},
  doi = {10.3390/app14145980}
}
Kostenlos starten →