Analysis and Experiment of Thermal Field Distribution and Thermal Deformation of Nut Rotary Ball Screw Transmission Mechanism
Applied Sciences · 02.07.2024 · 14 (13) · 5790
DOI: 10.3390/app14135790 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 02.07.2024. Verfasst von Hanwen Yu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Doctoral Research Fund Project of Shandong Jianzhu University.
Abstract (Originalsprache)
This study designs a differential dual-drive micro-feed mechanism, superposing the two “macro feed motions” (“motor drive screw” and “motor drive nut”) using the same transmission of “the nut rotary ball screw pair” structure. These two motions are almost equal in terms of speed and turning direction, thus the “micro feed” can be obtained. (1)
Background
Thermal deformation is the primary factor that can restrict the high-precision micro-feed mechanism and the distribution of heat sources differs from that of the conventional screw single-drive system owing to the structure and motion features of the transmission components. (2)
Discussion
This study explores the thermal field distribution and thermal deformation of the differentially driven micro-feed mechanism when two driving motors are combined at different speeds. (3)
Methods
Based on the theory of heat transfer, the differential dual-drive system can be used as the research object. The thermal equilibrium equations of the micro-feed transmission system are established using the thermal resistance network method, and a thermal field distribution model is obtained. (4)
Results
Combined with the mechanism of thermal deformation theory, the established thermal field model is used to predict the axial thermal deformation of the differential dual-drive ball screw. (5)
Conclusions
Under the dual-drive condition, the steady-state thermal error of the nut-rotating ball screw transmission mechanism increases with the increase in nut speed and composite speed and is greater than the steady-state thermal error under the single screw drive condition. After reaching the thermal steady state, the measured thermal elongation at the end of the screw in the experiment is approximately 10.5 μm and the simulation result is 11.98 μm. The experimental measurement result demonstrates the accuracy of the theoretical analysis model for thermal error at the end of the screw.
Förderung
- Doctoral Research Fund Project of Shandong Jianzhu University
Zitieren
APA
Yu, H., Luan, X., Zheng, G., Hao, G., Liu, Y., Xing, H., Liu, Y., Fu, X., & Liu, Z. (2024). Analysis and Experiment of Thermal Field Distribution and Thermal Deformation of Nut Rotary Ball Screw Transmission Mechanism. Applied Sciences, 14(13), 5790. https://doi.org/10.3390/app14135790
Vancouver
Yu H, Luan X, Zheng G, Hao G, Liu Y, Xing H, et al. Analysis and Experiment of Thermal Field Distribution and Thermal Deformation of Nut Rotary Ball Screw Transmission Mechanism. Applied Sciences. 2024;14(13):5790. doi:10.3390/app14135790
BibTeX
@article{Yu2024,
author = {Yu, Hanwen and Luan, Xuecheng and Zheng, Guiyuan and Hao, Guangchao and Liu, Yan and Xing, Hongyu and Liu, Yandong and Fu, Xiaokui and Liu, Zhi},
title = {Analysis and Experiment of Thermal Field Distribution and Thermal Deformation of Nut Rotary Ball Screw Transmission Mechanism},
journal = {Applied Sciences},
year = {2024},
volume = {14},
number = {13},
pages = {5790},
doi = {10.3390/app14135790}
}
EUVIMED