EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Fault Detection and Automatic Diagnosis Technology of Water Hammer in Centrifugal Pump

Lei Chen, Zhenao Li, Wenxuan Shi, Wenlong Li

Applied Sciences · 27.06.2024 · 14 (13) · 5606

DOI: 10.3390/app14135606 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 27.06.2024. Verfasst von Lei Chen und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Scientific and Technological Projects in Henan Province, National Key Research and Development Project of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Centrifugal pumps are important equipment in industrial production, and their safe and reliable operation is of great significance to water supply and industrial safety. During the use of centrifugal pumps, faults such as bearing damage, blade wear, shaft imbalance, shaft misalignment and water hammer often occur. Among them, although water hammer faults occur at a low frequency, they are difficult to monitor and pose significant risks to valve and pipeline interfaces. This article analyzes the causes, mechanisms and phenomena of water hammer faults in centrifugal pumps, designs a monitoring method to effectively monitor the vibration signal of the centrifugal pumps, extracts vibration characteristics to determine and record water hammer events, designs monitoring and diagnostic models for the edge layer and server side, and establishes an experimental verification testing system. The test results show that, under the conditions of simulating water hammer faults, after high-pass filtering of the collected vibration data, the kurtosis index, pulse index and margin index all exceed twice the threshold, and both sensors emit water hammer alarms. The designed data acquisition method can capture water hammer signals in a timely manner, and the analysis model can automatically identify water hammer faults based on existing fault knowledge and rules. This fully demonstrates the scientific and effective nature of the proposed centrifugal pump fault monitoring method and system, which is of great significance for ensuring the safe operation and improving the design of centrifugal pumps.

Förderung

  • National Natural Science Foundation of China
  • Key Scientific and Technological Projects in Henan Province
  • National Key Research and Development Project of China

Zitieren

APA

Chen, L., Li, Z., Shi, W., & Li, W. (2024). Research on Fault Detection and Automatic Diagnosis Technology of Water Hammer in Centrifugal Pump. Applied Sciences, 14(13), 5606. https://doi.org/10.3390/app14135606

Vancouver

Chen L, Li Z, Shi W, Li W. Research on Fault Detection and Automatic Diagnosis Technology of Water Hammer in Centrifugal Pump. Applied Sciences. 2024;14(13):5606. doi:10.3390/app14135606

BibTeX
@article{Chen2024,
  author = {Chen, Lei and Li, Zhenao and Shi, Wenxuan and Li, Wenlong},
  title = {Research on Fault Detection and Automatic Diagnosis Technology of Water Hammer in Centrifugal Pump},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {13},
  pages = {5606},
  doi = {10.3390/app14135606}
}
Kostenlos starten →