Exploring Flexural Strength Variation in Polymeric Materials for Provisional Fixed Prosthetic Structures: Comparative Analysis with and without Reinforcement through Laboratory Experimentation and Statistical Evaluation
Applied Sciences · 04.05.2024 · 14 (9) · 3923
DOI: 10.3390/app14093923 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 04.05.2024. Verfasst von Mariana Dimova-Gabrovska und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Medical University-Sofia.
Abstract (Originalsprache)
Provisional fixed partial dentures represent a critical phase in dental treatment, necessitating heightened mechanical durability, particularly in comprehensive and extended treatment plans. Strengthening these structures with various reinforcing materials offers a method to enhance their resilience. Utilizing a three-point testing methodology on standardized trial specimens allows for a comparative assessment of various materials and reinforcement techniques for pre-prosthetic applications. This study aims to validate and assess the significance of integrating different reinforcing materials into standardized test bodies. The study focuses on test specimens comprising three types of unreinforced laboratory and clinical polymers for provisional constructions (n = 6)—heat-cured PMMA (Superpont C+B, Spofa Dental, Czech Republic), CAD-CAM prefabricated PMMA (DD temp MED, Dental Direkt, Germany), CAD-CAM printing resin (Temporary CB Resin, FormLabs, USA), self-polymerizing PEMA (DENTALON plus, Kulzer, Germany), light-polymerizing composite (Revotek LC, GC, Japan), and dual-polymerizing composite (TempSpan, Pentron, USA). Additionally, laboratory polymers are evaluated in groups with five types of reinforcing filaments (n = 15)—Glass Fiber (Fiber Splint One-Layer, Polydentia, Switzerland), Polyethylene thread (Ribbond Regular 4.0 mm, Ribbond Inc., USA), triple-stranded chrome-cobalt wire for splinting 015″ (Leone S.p.a., Italy), Aesthetic ligature wire 012″ (Leone S.p.a., Italy), and Glass Fiber coated with light-cured composite 8.5 × 0.2 mm (Interlig, Angelus, Brazil). Analysis of the data using Generalized Linear Models (GLMs) reveals that the experimental bodies, produced via the subtractive digital method using PMMA (DD temp MED, Dental Direkt GmbH, Germany) as the polymer and glass filaments as the reinforcement, exhibit superior mechanical properties, particularly when pre-wetted with Interlig liquid composite (Angelus, Brazil).
Förderung
- Medical University-Sofia
Zitieren
APA
Dimova-Gabrovska, M., Uzunov, T., Gusiyska, A., Shopova, D., Taneva, I., Gerdzhikov, I., & Rangelov, S. (2024). Exploring Flexural Strength Variation in Polymeric Materials for Provisional Fixed Prosthetic Structures: Comparative Analysis with and without Reinforcement through Laboratory Experimentation and Statistical Evaluation. Applied Sciences, 14(9), 3923. https://doi.org/10.3390/app14093923
Vancouver
Dimova-Gabrovska M, Uzunov T, Gusiyska A, Shopova D, Taneva I, Gerdzhikov I, et al. Exploring Flexural Strength Variation in Polymeric Materials for Provisional Fixed Prosthetic Structures: Comparative Analysis with and without Reinforcement through Laboratory Experimentation and Statistical Evaluation. Applied Sciences. 2024;14(9):3923. doi:10.3390/app14093923
BibTeX
@article{DimovaGabrovska2024,
author = {Dimova-Gabrovska, Mariana and Uzunov, Todor and Gusiyska, Angela and Shopova, Dobromira and Taneva, Iva and Gerdzhikov, Ivan and Rangelov, Stefan},
title = {Exploring Flexural Strength Variation in Polymeric Materials for Provisional Fixed Prosthetic Structures: Comparative Analysis with and without Reinforcement through Laboratory Experimentation and Statistical Evaluation},
journal = {Applied Sciences},
year = {2024},
volume = {14},
number = {9},
pages = {3923},
doi = {10.3390/app14093923}
}
EUVIMED