Practical Steps towards Establishing an Underwater Acoustic Network in the Context of the Marine Internet of Things
Applied Sciences · 22.04.2024 · 14 (8) · 3527
DOI: 10.3390/app14083527 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 22.04.2024. Verfasst von Konstantin Kebkal und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sevastopol State University, Russian Ministry of Education and Science.
Abstract (Originalsprache)
When several hydroacoustic modems operate simultaneously in an area of mutual coverage, collisions of data packets received from several sources may occur, which lead to information loss. With an increase in the number of simultaneously operating hydroacoustic modems, physical layer algorithms do not provide stable data transmission and the likelihood of collisions increases, which makes the operation of modems ineffective. To ensure effective operation in a hydroacoustic signal propagation environment and to reduce collisions when exchanging data between two modems that do not have the ability to operate synchronously and to reduce the access time to the signal propagation environment, methods of the medium access control layer using link layer protocols are required. Typically, this problem is solved using code separation of hydroacoustic channels. If you need to transfer over a network, this option will not work, since network transfer involves working on the basis of “broadcast” messages, particularly between data source and data sink that remain too far from each other, outside of their mutual audibility. In practical use, it is convenient to place these protocols into a software environment for developing specific user applications for solving network communication problems. This software framework allows for custom modification of existing network algorithms, as well as the inclusion of new network hydroacoustic communication algorithms. To build a predictive model, the DACAP, T-Lohi, Flooding, and ICRP protocols were used in this work. The implementation is performed in Erlang. The paper presents algorithms for implementing these protocols. A comparative analysis of network operation with and without protocols is provided. Efficiency of operation, i.e., data rates and probabilities of data delivery, was assessed.
Förderung
- Sevastopol State University
- Russian Ministry of Education and Science
Zitieren
APA
Kebkal, K., Kabanov, A., Kramar, O., Dimin, M., Abkerimov, T., Kramar, V., & Kebkal-Akbari, V. (2024). Practical Steps towards Establishing an Underwater Acoustic Network in the Context of the Marine Internet of Things. Applied Sciences, 14(8), 3527. https://doi.org/10.3390/app14083527
Vancouver
Kebkal K, Kabanov A, Kramar O, Dimin M, Abkerimov T, Kramar V, et al. Practical Steps towards Establishing an Underwater Acoustic Network in the Context of the Marine Internet of Things. Applied Sciences. 2024;14(8):3527. doi:10.3390/app14083527
BibTeX
@article{Kebkal2024,
author = {Kebkal, Konstantin and Kabanov, Aleksey and Kramar, Oleg and Dimin, Maksim and Abkerimov, Timur and Kramar, Vadim and Kebkal-Akbari, Veronika},
title = {Practical Steps towards Establishing an Underwater Acoustic Network in the Context of the Marine Internet of Things},
journal = {Applied Sciences},
year = {2024},
volume = {14},
number = {8},
pages = {3527},
doi = {10.3390/app14083527}
}
EUVIMED