EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Recycled Concrete and Brick Aggregates on the Flexural and Bond Performance of Reinforced Concrete

Abdul Basit, Rashid Hameed, Safeer Abbas, Muhammad Karam, Shaban Shahzad, Syed Kazmi, Muhammad Munir

Applied Sciences · 24.03.2024 · 14 (7) · 2719

DOI: 10.3390/app14072719 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 24.03.2024. Verfasst von Abdul Basit und 6 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Higher Education Commission (HEC) of Pakistan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The construction industry strongly relies on concrete and clay bricks for various applications. The escalating demand for these materials, driven by rapid population growth, has led to resource depletion and increased construction and demolition waste (CDW). Recycling CDW into construction materials, particularly in the form of recycled concrete aggregates (RCAs) and recycled brick aggregates (RBAs), has emerged as a promising solution. This study deals with the structural performance of concrete incorporating RCAs and RBAs. The experimental program encompasses material characterization, concrete mix design, and several tests to assess density, compressive strength, bond behavior, and flexural properties. The results indicate that the replacement of fine natural aggregate (NA) with fine RCAs or RBAs has a negligible impact on density, while the partial replacement of coarse NAs with RAs yields modest reductions in compressive strength. Notably, the bond strength between steel rebar and concrete is influenced by the type and content of RA, with specimens containing RCAs exhibiting a higher bond strength than those with RBAs. Empirical models used to predict bond strength generally align with experimental results, with conservative predictions by some models, such as ACI 318, and overestimation by others, such as models proposed by AS-3600 and CEB-FIB. The flexural tests of beams highlight the variation in stiffness and load-bearing capacity with the proportion of NAs replaced by RAs. While beams with 50% NA replacement demonstrate comparable performance to control beams, those with 100% RA replacement exhibit lower cracking and yielding stiffness. Cracking patterns in beams with RAs differ from control beams, with RA-containing beams showing more cracks and an altered crack distribution. The findings underscore the feasibility of using recycled aggregates in construction, with partial NA replacement offering a balance between sustainable material usage and desired structural properties.

Förderung

  • Higher Education Commission (HEC) of Pakistan

Zitieren

APA

Basit, A., Hameed, R., Abbas, S., Karam, M., Shahzad, S., Kazmi, S., & Munir, M. (2024). Impact of Recycled Concrete and Brick Aggregates on the Flexural and Bond Performance of Reinforced Concrete. Applied Sciences, 14(7), 2719. https://doi.org/10.3390/app14072719

Vancouver

Basit A, Hameed R, Abbas S, Karam M, Shahzad S, Kazmi S, et al. Impact of Recycled Concrete and Brick Aggregates on the Flexural and Bond Performance of Reinforced Concrete. Applied Sciences. 2024;14(7):2719. doi:10.3390/app14072719

BibTeX
@article{Basit2024,
  author = {Basit, Abdul and Hameed, Rashid and Abbas, Safeer and Karam, Muhammad and Shahzad, Shaban and Kazmi, Syed and Munir, Muhammad},
  title = {Impact of Recycled Concrete and Brick Aggregates on the Flexural and Bond Performance of Reinforced Concrete},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {7},
  pages = {2719},
  doi = {10.3390/app14072719}
}
Kostenlos starten →