Study on Load Distribution and Fatigue Elastic Life of Ball Screw under Ultimate Conditions
Applied Sciences · 28.02.2024 · 14 (5) · 1966
DOI: 10.3390/app14051966 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 28.02.2024. Verfasst von Lei Lv und 3 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
When subjected to extreme loads and ultra-low cycling conditions, the primary mode of failure in a ball screw is that excessive plastic contact deformation of the raceway surface exceeds acceptable limits. Consequently, traditional fatigue life theories based on pitting fatigue are not applicable in this context. This study evaluated the load distribution within the ball screw, considering factors such as the nut position and screw length. The plastic deformation of the raceway surfaces is analyzed using Thornton’s elastoplastic theory. Furthermore, this paper integrates the concepts of plastic deformation and fatigue elastic life to investigate the fatigue elastic life of ball screws under extreme conditions. To validate the proposed approach, the calculated results are compared with those from previous experimental studies, confirming its effectiveness. When the ratio of the nut position to the screw length approaches 0.7, the fatigue elastic life of the ball screw achieves its maximum. An increase in screw length, load, or raceway conformity ratio leads to a decrease in fatigue elastic life. Conversely, an increase in contact angle and ball diameter enhances the fatigue elastic life.
Zitieren
APA
Lv, L., Lu, C., Chen, S., & Wang, W. (2024). Study on Load Distribution and Fatigue Elastic Life of Ball Screw under Ultimate Conditions. Applied Sciences, 14(5), 1966. https://doi.org/10.3390/app14051966
Vancouver
Lv L, Lu C, Chen S, Wang W. Study on Load Distribution and Fatigue Elastic Life of Ball Screw under Ultimate Conditions. Applied Sciences. 2024;14(5):1966. doi:10.3390/app14051966
BibTeX
@article{Lv2024,
author = {Lv, Lei and Lu, Changhou and Chen, Shujiang and Wang, Weike},
title = {Study on Load Distribution and Fatigue Elastic Life of Ball Screw under Ultimate Conditions},
journal = {Applied Sciences},
year = {2024},
volume = {14},
number = {5},
pages = {1966},
doi = {10.3390/app14051966}
}
EUVIMED