EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

MDCIM: MRAM-Based Digital Computing-in-Memory Macro for Floating-Point Computation with High Energy Efficiency and Low Area Overhead

Liang Liu, Lehao Tan, Jie Gan, Biao Pan, Jiahui Zhou, Zhengliang Li

Applied Sciences · 31.10.2023 · 13 (21) · 11914

DOI: 10.3390/app132111914 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 31.10.2023. Verfasst von Liang Liu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Computing-in-Memory (CIM) is a novel computing architecture that enormously improves energy efficiency and reduces computing latency by avoiding frequent data movement between the computation and memory units. Currently, digital CIM is regarded as more suitable for high-precision operations represented in floating-point arithmetic, as it is not limited by the bit width of ADC/DAC in analog CIM. However, the development of DCIM still faces two problems: On the one hand, mainstream SRAM-based DCIM memory cells introduce large area overheads, which contain at least six transistors per cell. On the other hand, existing DCIM solutions can only support the computing precision up to FP32, failing to meet the demands of high-accuracy application scenarios. To overcome these problems, this work designs a novel SOT-MRAM-based digital CIM macro (MDCIM) with higher area/energy efficiency and achieves double-precision floating-point (FP64) computation with a modified fused multiply–accumulate (FMA) module. The proposed design is synthesized with a 55 nm CMOS technology node, achieving 0.62 mW power consumption, 26.9 GOPS/W, and 0.332 GOPS/mm2 energy efficiency at 150 MHz with 1.08 V supply. Circuit level simulation results show that the MDCIM can achieve higher area utilization compared to previous SRAM-based CIM designs.

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Liu, L., Tan, L., Gan, J., Pan, B., Zhou, J., & Li, Z. (2023). MDCIM: MRAM-Based Digital Computing-in-Memory Macro for Floating-Point Computation with High Energy Efficiency and Low Area Overhead. Applied Sciences, 13(21), 11914. https://doi.org/10.3390/app132111914

Vancouver

Liu L, Tan L, Gan J, Pan B, Zhou J, Li Z. MDCIM: MRAM-Based Digital Computing-in-Memory Macro for Floating-Point Computation with High Energy Efficiency and Low Area Overhead. Applied Sciences. 2023;13(21):11914. doi:10.3390/app132111914

BibTeX
@article{Liu2023,
  author = {Liu, Liang and Tan, Lehao and Gan, Jie and Pan, Biao and Zhou, Jiahui and Li, Zhengliang},
  title = {MDCIM: MRAM-Based Digital Computing-in-Memory Macro for Floating-Point Computation with High Energy Efficiency and Low Area Overhead},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {21},
  pages = {11914},
  doi = {10.3390/app132111914}
}
Kostenlos starten →