Effects of Dry Density and Moisture Content on the Kaolin–Brass Interfacial Shear Adhesion
Applied Sciences · 11.10.2023 · 13 (20) · 11191
DOI: 10.3390/app132011191 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 11.10.2023. Verfasst von Rayed Almasoudi und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Kaolin clay, with its consistent properties, fine particle size, high surface area, and extensive historical use, stands out as a reliable choice for laboratory research. This study aims to assess the interface shear adhesion behaviour between compacted clay and a metallic surface. For this purpose, a new testing approach was developed. The proposed method is simple, requires neither advanced equipment nor specialised test procedures, and, thus, represents an improvement over existing practices in this field. The experimental program focuses on determining the interface shear adhesion strength between reconstituted kaolin clay and a metallic surface. The kaolin clay testing specimens were dynamically compacted at various energy levels and moisture contents. The results indicate that the optimum moisture content is 30%, which provides the highest density to the sample and divides the compaction curve into dry and wet sides. Furthermore, the results demonstrate that the interface shear adhesion strength increases with the clay’s dry density. Conversely, there is a significant decrease in strength as the moisture content specifically rises on the wet side of the compaction curve. The adhesion behaviour was also attributed to matric suction, where high suction enhanced interfacial adhesion, while low suction weakened bonding and diminished adhesion. Additionally, this study presents a unique three-dimensional contour graph illustrating the combined effects of dry density and moisture content on the interfacial adhesion.
Zitieren
APA
Almasoudi, R., Abuel-Naga, H., & Daghistani, F. (2023). Effects of Dry Density and Moisture Content on the Kaolin–Brass Interfacial Shear Adhesion. Applied Sciences, 13(20), 11191. https://doi.org/10.3390/app132011191
Vancouver
Almasoudi R, Abuel-Naga H, Daghistani F. Effects of Dry Density and Moisture Content on the Kaolin–Brass Interfacial Shear Adhesion. Applied Sciences. 2023;13(20):11191. doi:10.3390/app132011191
BibTeX
@article{Almasoudi2023,
author = {Almasoudi, Rayed and Abuel-Naga, Hossam and Daghistani, Firas},
title = {Effects of Dry Density and Moisture Content on the Kaolin–Brass Interfacial Shear Adhesion},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {20},
pages = {11191},
doi = {10.3390/app132011191}
}
EUVIMED