EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tolerance Synthesis of Delta-like Parallel Robots Using a Nonlinear Optimisation Method

Allaoua Brahmia, Adlen Kerboua, Ridha Kelaiaia, Ameur Latreche

Applied Sciences · 26.09.2023 · 13 (19) · 10703

DOI: 10.3390/app131910703 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 26.09.2023. Verfasst von Allaoua Brahmia und 3 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Robotic systems require high accuracy in manipulating objects. Positioning errors are influenced by geometric tolerances and various sources. This paper introduces a new technique based on the interior-point algorithm optimisation method to allocate tolerances to the geometric parameters of a robot. This method consists of three steps. First, a method for modelling the kinematic problem as well as the geometric errors must be used. The Denavit–Hartenberg rule is the most suitable method for this modelling case. Then, a mathematical model for tolerance allocation is developed and used as a nonlinear multivariable optimisation problem. Finally, the “interior-point” algorithm is used to solve this optimisation problem. The accuracy and efficiency of the proposed method, in determining the tolerance allocations for a Delta parallel robot, is illustrated via calculation and simulation results. The values of the dimensional tolerances found are optimal. As a result, these values always keep the accuracy less than or equal to the imposed value.

Zitieren

APA

Brahmia, A., Kerboua, A., Kelaiaia, R., & Latreche, A. (2023). Tolerance Synthesis of Delta-like Parallel Robots Using a Nonlinear Optimisation Method. Applied Sciences, 13(19), 10703. https://doi.org/10.3390/app131910703

Vancouver

Brahmia A, Kerboua A, Kelaiaia R, Latreche A. Tolerance Synthesis of Delta-like Parallel Robots Using a Nonlinear Optimisation Method. Applied Sciences. 2023;13(19):10703. doi:10.3390/app131910703

BibTeX
@article{Brahmia2023,
  author = {Brahmia, Allaoua and Kerboua, Adlen and Kelaiaia, Ridha and Latreche, Ameur},
  title = {Tolerance Synthesis of Delta-like Parallel Robots Using a Nonlinear Optimisation Method},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {19},
  pages = {10703},
  doi = {10.3390/app131910703}
}
Kostenlos starten →