EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Vision- and Lidar-Based Autonomous Docking and Recharging of a Mobile Robot for Machine Tending in Autonomous Manufacturing Environments

Feiyu Jia, Misha Afaq, Ben Ripka, Quamrul Huda, Rafiq Ahmad

Applied Sciences · 26.09.2023 · 13 (19) · 10675

DOI: 10.3390/app131910675 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 26.09.2023. Verfasst von Feiyu Jia und 4 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Economic Development, Trade, and Tourism of the Government of Alberta, Go Productivity funding, NSERC.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Autonomous docking and recharging are among the critical tasks for autonomous mobile robots that work continuously in manufacturing environments. This requires robots to demonstrate the following abilities: (i) detecting the charging station, typically in an unstructured environment and (ii) autonomously docking to the charging station. However, the existing research, such as that on infrared range (IR) sensor-based, vision-based, and laser-based methods, identifies many difficulties and challenges, including lighting conditions, severe weather, and the need for time-consuming computation. With the development of deep learning techniques, real-time object detection methods have been widely applied in the manufacturing field for the recognition and localization of target objects. Nevertheless, those methods require a large amount of proper and high-quality data to achieve a good performance. In this study, a Hikvision camera was used to collect data from a charging station in a manufacturing environment; then, a dataset for the wireless charger was built. In addition, the authors of this paper propose an autonomous docking and recharging method based on the deep learning model and the Lidar sensor for a mobile robot operating in a manufacturing environment. In the proposed method, a YOLOv7-based object detection method was developed, trained, and evaluated to enable the robot to quickly and accurately recognize the charging station. Mobile robots can achieve autonomous docking to the charging station using the proposed Lidar-based approach. Compared to other methods, the proposed method has the potential to improve recognition accuracy and efficiency and reduce the computation costs for the mobile robot system in various manufacturing environments. The developed method was tested in real-world scenarios and achieved an average accuracy of 95% in recognizing the target charging station. This vision-based charger detection method, if fused with the proposed Lidar-based docking method, can improve the overall accuracy of the docking alignment process.

Förderung

  • Ministry of Economic Development, Trade, and Tourism of the Government of Alberta
  • Go Productivity funding
  • NSERC

Zitieren

APA

Jia, F., Afaq, M., Ripka, B., Huda, Q., & Ahmad, R. (2023). Vision- and Lidar-Based Autonomous Docking and Recharging of a Mobile Robot for Machine Tending in Autonomous Manufacturing Environments. Applied Sciences, 13(19), 10675. https://doi.org/10.3390/app131910675

Vancouver

Jia F, Afaq M, Ripka B, Huda Q, Ahmad R. Vision- and Lidar-Based Autonomous Docking and Recharging of a Mobile Robot for Machine Tending in Autonomous Manufacturing Environments. Applied Sciences. 2023;13(19):10675. doi:10.3390/app131910675

BibTeX
@article{Jia2023,
  author = {Jia, Feiyu and Afaq, Misha and Ripka, Ben and Huda, Quamrul and Ahmad, Rafiq},
  title = {Vision- and Lidar-Based Autonomous Docking and Recharging of a Mobile Robot for Machine Tending in Autonomous Manufacturing Environments},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {19},
  pages = {10675},
  doi = {10.3390/app131910675}
}
Kostenlos starten →