EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization-Based Input-Shaping Swing Control of Overhead Cranes

Weiqiang Tang, Rui Ma, Wei Wang, Haiyan Gao

Applied Sciences · 25.08.2023 · 13 (17) · 9637

DOI: 10.3390/app13179637 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 25.08.2023. Verfasst von Weiqiang Tang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Program of Gansu Province, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel swing control scheme combining optimization and input-shaping techniques is proposed for overhead cranes subjected to parameter variations and modeling errors. An input shaper was first designed using the analytical method based on the linear swing dynamic model. Then, the particle swarm optimization algorithm was used to optimize the pulse amplitudes and time of the shaper to reduce the influence of modeling errors on the residual vibration. Furthermore, an adaptive optimization method was also used to optimize the parameters of the shaper to suppress the influence of the change in the payload mass and the rope length on the residual vibration. The proposed control scheme can suppress the influence of uncertainties on residual vibration and improve the anti-disturbance ability of a closed-loop system via offline and online dual optimization. Finally, the simulation results verify the effectiveness of the scheme.

Förderung

  • Science and Technology Program of Gansu Province
  • National Natural Science Foundation of China

Zitieren

APA

Tang, W., Ma, R., Wang, W., & Gao, H. (2023). Optimization-Based Input-Shaping Swing Control of Overhead Cranes. Applied Sciences, 13(17), 9637. https://doi.org/10.3390/app13179637

Vancouver

Tang W, Ma R, Wang W, Gao H. Optimization-Based Input-Shaping Swing Control of Overhead Cranes. Applied Sciences. 2023;13(17):9637. doi:10.3390/app13179637

BibTeX
@article{Tang2023,
  author = {Tang, Weiqiang and Ma, Rui and Wang, Wei and Gao, Haiyan},
  title = {Optimization-Based Input-Shaping Swing Control of Overhead Cranes},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {17},
  pages = {9637},
  doi = {10.3390/app13179637}
}
Kostenlos starten →