Study on Dynamic Uncertainty and Sensitivity of Gear System Considering the Influence of Machining Accuracy
Applied Sciences · 08.07.2023 · 13 (14) · 8011
DOI: 10.3390/app13148011 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 08.07.2023. Verfasst von Fang Guo und 3 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities, CHD, National Natural Science Foundation of China.
Abstract (Originalsprache)
Due to the limitation of machining accuracy, the transmission performance uncertainty of mass gears must be evaluated quantitatively to provide the basis for its application in the whole machine. Based on the polynomial chaotic expansion (PCE) method, a dynamic uncertainty analysis method for gear systems with a specified precision was proposed in this paper. Combined with tooth surface contact analysis and load-bearing contact analysis, a dynamic model of the gear system was established to fully reflect the influence of typical manufacturing errors. Based on this, a PCE model was established to approximate the system dynamics model. The dynamic uncertainty of the gear system was quantified based on the PCE approximation model and the Monte Carlo method, respectively, and the computational accuracy and efficiency of the PCE model with different orders and numbers of sample points were compared and analyzed. Finally, Sobol′ sensitivity indices from the PCE model of the gear system to random errors were computed, and the primary and secondary relationships of influence on the dynamic performance of the gear system were determined. The results showed that the PCE method had good applicability to the quantification of dynamic uncertainty and error sensitivity analysis of gear systems, and it had both accuracy and high efficiency.
Förderung
- Fundamental Research Funds for the Central Universities, CHD
- National Natural Science Foundation of China
Zitieren
APA
Guo, F., Li, C., Su, J., & Liu, C. (2023). Study on Dynamic Uncertainty and Sensitivity of Gear System Considering the Influence of Machining Accuracy. Applied Sciences, 13(14), 8011. https://doi.org/10.3390/app13148011
Vancouver
Guo F, Li C, Su J, Liu C. Study on Dynamic Uncertainty and Sensitivity of Gear System Considering the Influence of Machining Accuracy. Applied Sciences. 2023;13(14):8011. doi:10.3390/app13148011
BibTeX
@article{Guo2023,
author = {Guo, Fang and Li, Chen and Su, Jinzhan and Liu, Chao},
title = {Study on Dynamic Uncertainty and Sensitivity of Gear System Considering the Influence of Machining Accuracy},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {14},
pages = {8011},
doi = {10.3390/app13148011}
}
EUVIMED