Investigating the Device Performance Variation of a Buried Locally Gated Al/Al2O3 Graphene Field-Effect Transistor Process
Applied Sciences · 16.06.2023 · 13 (12) · 7201
DOI: 10.3390/app13127201 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 16.06.2023. Verfasst von Tzu-Jung Huang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kate Gleason College of Engineering at Rochester Institute of Technology, Ministerio de Ciencia, Innovación, y Universidades.
Abstract (Originalsprache)
In this study, a process is developed for the fabrication of buried top-gated graphene transistors with Al2O3 as a gate dielectric, yielding devices that can be suitable for not only flexible electronics but also laser-induced graphene (LIG)-based technology implementations. A new processing option is presented with the use of tetraethyl-orthosilicate (TEOS) as an etch stop for contact via etching of Al2O3. Buried locally gated Al/Al2O3 graphene field-effect transistors (GFETs) are fabricated with Dirac points as low as 4 V, with a metal-to-graphene contact resistance as low as ∼1.7 kΩ·µm, and an average hole mobility of 457.97 cm2/V·s with a non-uniformity of 93%. Large device variation and non-uniformity in electrical performance are not uncommon for graphene-based devices, as process-induced defects play a major role in such variation. AFM, SEM, Raman spectroscopy, and model fitting indicated that the rough Al/Al2O3 surface was the main factor for the observed device variation. AFM analysis indicated a graphene surface roughness Ra of 16.19 nm on top of the buried Al/Al2O3 gate in contrast to a Ra of 4.06 nm over Al2O3/SiO2. The results presented indicate the need to reduce device variability and non-uniformity by improving transfer methods, as well as the use of smoother surfaces and compatible materials. The presented analyses provide a framework with which other researchers can analyze and correlate device variation and non-uniformities while methods to reduce variability are investigated.
Förderung
- Kate Gleason College of Engineering at Rochester Institute of Technology
- Ministerio de Ciencia, Innovación, y Universidades
Zitieren
APA
Huang, T., Ankolekar, A., Pacheco-Sanchez, A., & Puchades, I. (2023). Investigating the Device Performance Variation of a Buried Locally Gated Al/Al2O3 Graphene Field-Effect Transistor Process. Applied Sciences, 13(12), 7201. https://doi.org/10.3390/app13127201
Vancouver
Huang T, Ankolekar A, Pacheco-Sanchez A, Puchades I. Investigating the Device Performance Variation of a Buried Locally Gated Al/Al2O3 Graphene Field-Effect Transistor Process. Applied Sciences. 2023;13(12):7201. doi:10.3390/app13127201
BibTeX
@article{Huang2023,
author = {Huang, Tzu-Jung and Ankolekar, Adheesh and Pacheco-Sanchez, Anibal and Puchades, Ivan},
title = {Investigating the Device Performance Variation of a Buried Locally Gated Al/Al2O3 Graphene Field-Effect Transistor Process},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {12},
pages = {7201},
doi = {10.3390/app13127201}
}
EUVIMED