Stress Analysis and Spalling Failure Simulation on Surrounding Rock of Deep Arch Tunnel
Applied Sciences · 25.05.2023 · 13 (11) · 6474
DOI: 10.3390/app13116474 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 25.05.2023. Verfasst von Kang Peng und 3 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Hunan Provincial Natural Science Foundation for Distinguished Young Scholars, Science and Technology Innovation Program of Hunan Province.
Abstract (Originalsprache)
To study the stress distribution characteristics of surrounding rock and the spalling mechanism of deep hard rock tunnels with different arch heights, the complex variable function and angle-preserving transformation method in elasticity theory were applied to the analytic solution of tangential stress distribution of arch tunnels during stress adjustment. In addition, true triaxial tests were conducted on granite cube specimens (100 mm × 100 mm × 100 mm) containing holes with three arch heights (including the 25 mm semi-circular arch, 16.7 mm three-centered arch, 12.5 mm three-centered arch) to simulate the spalling process under different initial ground stresses. The stress distribution solution and experimental results show that the initial failure stress of arch holes is 0.39–0.48 times the uniaxial compressive strength (UCS) of the rock. The initial failure location occurs at the arch foot, where tangential stress maximizes. When the lateral pressure coefficient is in the range of 0.38–0.50, the tangential stress is 3.2–3.5 times the UCS. The rock debris of the hole wall are in thin flake shapes. Symmetrical V-shaped or curved failure zones occurred on hole sidewalls. The stress distribution resolution of the surrounding rock of tunnels with different arch heights shows that with the increasing burial depth, the bearing performance of the semi-circular arch tunnel is optimal. In addition, the maximum tangential stress increases as the height of the arch decreases or the lateral stress increases, making it easier for the initial failure to occur at the foot of the arch.
Förderung
- National Natural Science Foundation of China
- Hunan Provincial Natural Science Foundation for Distinguished Young Scholars
- Science and Technology Innovation Program of Hunan Province
- Fundamental Research Funds for the Central Universities of Central South University
Zitieren
APA
Peng, K., Yi, G., Luo, S., & Si, X. (2023). Stress Analysis and Spalling Failure Simulation on Surrounding Rock of Deep Arch Tunnel. Applied Sciences, 13(11), 6474. https://doi.org/10.3390/app13116474
Vancouver
Peng K, Yi G, Luo S, Si X. Stress Analysis and Spalling Failure Simulation on Surrounding Rock of Deep Arch Tunnel. Applied Sciences. 2023;13(11):6474. doi:10.3390/app13116474
BibTeX
@article{Peng2023,
author = {Peng, Kang and Yi, Guansheng and Luo, Song and Si, Xuefeng},
title = {Stress Analysis and Spalling Failure Simulation on Surrounding Rock of Deep Arch Tunnel},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {11},
pages = {6474},
doi = {10.3390/app13116474}
}
EUVIMED