EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Digital Standardization of Lean Manufacturing Tools According to Industry 4.0 Concept

Daniel Medyński, Piotr Bonarski, Piotr Motyka, Adam Wysoczański, Renata Gnitecka, Krzysztof Kolbusz, Magdalena Dąbrowska, Anna Burduk, Zdzisław Pawelec, José Machado

Applied Sciences · 20.05.2023 · 13 (10) · 6259

DOI: 10.3390/app13106259 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 20.05.2023. Verfasst von Daniel Medyński und 9 weiteren Autor:innen. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Standardization is a key element in the effective use of lean manufacturing methodologies and tools for achieving process sustainability. Their combination is conducive to eliminating waste and improving the efficiency of production processes and guarantees the company that employees use the most efficient tools and do not waste time on unnecessary activities. These activities can be further improved by using digital solutions, in accordance with the concept of Industry 4.0. Therefore, the authors have developed the e-Lean system, whose task is to digitize selected lean manufacturing tools. The subject of this work is analysis of the functionality and effectiveness of the essential part of the e-Lean system in the form of specialized TPM (Total Productive Maintenance) software as an application. During implementation in a construction production company, the TPM application was tested by lean manufacturing and maintenance specialists. The research consisted of assessing the functionality and efficiency of processes in relation to conventional TPM solutions. Additional functionalities of the e-Lean system have been confirmed, such as systemic approval of machinery inspection, which requires passing all necessary steps at individual inspection points, direct access for supervisors to the results of inspection activities and their status, direct and easy access to photographic documentation of machines added during inspection both in optimization of working time and its course (e.g., the optimal number of steps taken by the employee during the inspection), as well as an efficient system of motivating employees (collecting points). The improvement in the effectiveness of processes was determined by measuring the control times for three control points (polymerization furnace, packing area, and defibering machines). The average control time was reduced from 16,200 to 13,923 s. Thus, thanks to the use of the application, it was found that the efficiency of using the TPM tool was increased by approx. 15% compared to previously used non-digital solutions.

Förderung

  • Fundação para a Ciência e Tecnologia

Zitieren

APA

Medyński, D., Bonarski, P., Motyka, P., Wysoczański, A., Gnitecka, R., Kolbusz, K., Dąbrowska, M., Burduk, A., Pawelec, Z., & Machado, J. (2023). Digital Standardization of Lean Manufacturing Tools According to Industry 4.0 Concept. Applied Sciences, 13(10), 6259. https://doi.org/10.3390/app13106259

Vancouver

Medyński D, Bonarski P, Motyka P, Wysoczański A, Gnitecka R, Kolbusz K, et al. Digital Standardization of Lean Manufacturing Tools According to Industry 4.0 Concept. Applied Sciences. 2023;13(10):6259. doi:10.3390/app13106259

BibTeX
@article{Medyski2023,
  author = {Medyński, Daniel and Bonarski, Piotr and Motyka, Piotr and Wysoczański, Adam and Gnitecka, Renata and Kolbusz, Krzysztof and Dąbrowska, Magdalena and Burduk, Anna and Pawelec, Zdzisław and Machado, José},
  title = {Digital Standardization of Lean Manufacturing Tools According to Industry 4.0 Concept},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {10},
  pages = {6259},
  doi = {10.3390/app13106259}
}
Kostenlos starten →