EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a Virtual Reality-Based System for Simulating Welding Processes

Ngoc-Hien Tran, Van-Nghia Nguyen, Van-Hung Bui

Applied Sciences · 15.05.2023 · 13 (10) · 6082

DOI: 10.3390/app13106082 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 15.05.2023. Verfasst von Ngoc-Hien Tran und 2 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VIETNAM MINISTRY OF EDUCATION AND TRAINING.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Arc welding processes, such as shielded metal arc welding (SMAW), metal inert gas (MIG), and tungsten inert gas (TIG), play an important role in industrial applications. To improve the efficiency of the exploitation of traditional welding systems, new technologies have been used. Virtual reality technology is one of them. The virtual reality (VR)-based welding system enables to increase the frequency of practice to help learners obtain welding experience to avoid errors that occur during actual welding processes. This paper presents a VR-based system for simulating three welding processes: SMAW, MIG, and TIG. The developed system includes hardware components and VR software installed on a computer. The change in the physical devices, such as moving the welding torch and the distance from the welding torch to the plates to generate the weld bead, will update in real time and appear on the virtual environment. The functionality of the developed system for simulating the welding processes, such as in the real welding environment, was tested successfully. For implementing the system, welding speed and the distance from the welding torch to the plates are important process parameters, which determine the weld size or the weld formation. In this research, the ranges of the welding speed are 70 ÷ 120 mm/min; 240 ÷ 460 mm/min; and 250 ÷ 450 mm/min for the SMAW, TIG, and MIG processes, respectively. These values were tested experimentally. The distance from the welding torch to the plates to display the weld joint is 1.5 ÷ 5 mm. Outside of this range, no weld joint is formed. The welding widths are 4.4 ÷ 12.9 mm, 7.1 ÷ 12.4 mm, and 7.4 ÷ 11.3 mm for the SMAW, TIG, and MIG processes, respectively.

Förderung

  • VIETNAM MINISTRY OF EDUCATION AND TRAINING

Zitieren

APA

Tran, N., Nguyen, V., & Bui, V. (2023). Development of a Virtual Reality-Based System for Simulating Welding Processes. Applied Sciences, 13(10), 6082. https://doi.org/10.3390/app13106082

Vancouver

Tran N, Nguyen V, Bui V. Development of a Virtual Reality-Based System for Simulating Welding Processes. Applied Sciences. 2023;13(10):6082. doi:10.3390/app13106082

BibTeX
@article{Tran2023,
  author = {Tran, Ngoc-Hien and Nguyen, Van-Nghia and Bui, Van-Hung},
  title = {Development of a Virtual Reality-Based System for Simulating Welding Processes},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {10},
  pages = {6082},
  doi = {10.3390/app13106082}
}
Kostenlos starten →