EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties of Disconnectable Coupling Joints for Steel Bracing under Eccentric Load

Zhitian Xie, Xiaokai Niu, Pengfei Li, Mingju Zhang, Xiao Liu

Applied Sciences · 30.04.2023 · 13 (9) · 5596

DOI: 10.3390/app13095596 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 30.04.2023. Verfasst von Zhitian Xie und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Disconnectable coupling (DC) joints of steel bracing in foundation pit engineering are inevitably subjected to eccentric load, but their mechanical properties under eccentric load have not been thoroughly investigated. Based on full-scale test results of DC joints under axial compression, a validated finite element model was established. The bearing capacity and flexural performance of DC joints under eccentric load were studied systematically through a series of numerical simulations. These parameters included the length, width and height of the steel wedge; eccentricity; steel tube wall thickness; channel steel thickness and middle-rib plate height. Based on the numerical results, a modified moment–rotation model was established. The results obtained show that the numerical models accurately reflect the failure mode and the load-displacement curves revealed by the full-scale test. The bearing capacity and flexural performance of DC joints decreases with eccentricity, middle-rib plate height, and steel wedge height. The effect of eccentricity is the most significant. By contrast, the bearing capacity and flexural performance of DC joints increases with steel wedge length, steel wedge width, channel steel thickness and steel tube wall thickness. The modified moment–rotation model can describe the flexural performance of DC joints accurately under eccentric load.

Förderung

  • Natural Science Foundation of China

Zitieren

APA

Xie, Z., Niu, X., Li, P., Zhang, M., & Liu, X. (2023). Mechanical Properties of Disconnectable Coupling Joints for Steel Bracing under Eccentric Load. Applied Sciences, 13(9), 5596. https://doi.org/10.3390/app13095596

Vancouver

Xie Z, Niu X, Li P, Zhang M, Liu X. Mechanical Properties of Disconnectable Coupling Joints for Steel Bracing under Eccentric Load. Applied Sciences. 2023;13(9):5596. doi:10.3390/app13095596

BibTeX
@article{Xie2023,
  author = {Xie, Zhitian and Niu, Xiaokai and Li, Pengfei and Zhang, Mingju and Liu, Xiao},
  title = {Mechanical Properties of Disconnectable Coupling Joints for Steel Bracing under Eccentric Load},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {5596},
  doi = {10.3390/app13095596}
}
Kostenlos starten →