EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion Behavior of Stainless Steel in Seawater in the Presence of Sulfide

Senka Gudić, Ladislav Vrsalović, Ante Matošin, Jure Krolo, Emeka Emanuel Oguzie, Aleš Nagode

Applied Sciences · 29.03.2023 · 13 (7) · 4366

DOI: 10.3390/app13074366 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 29.03.2023. Verfasst von Senka Gudić und 5 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of temperature (from 288 to 308 K) and concentration of sulfide ions (up to 40 ppm) on the corrosion behavior of AISI 304L and AISI 316L stainless steels in seawater was studied with measurements of open-circuit potential, linear and potentiodynamic polarization, and electrochemical impedance spectroscopy. An increase in temperature and pollutant concentration negatively affects the corrosion stability of stainless steels at the open circuit (the resistance, compactness, and thickness of the surface layer decrease and the corrosion current increases), in the passive region (the passivation current increases, the depassivation potential decreases, and the passive potential region narrows), and in the transpassive potential region (the rate of metal dissolution increases). The occurrence of pitting corrosion on the surface of the samples was confirmed with optical microscopy and a non-contact 3D profilometer. A few large pits (depth 80–100 μm and width 100 μm) were formed on the surface of AISI 304L steel, while several smaller pits (depth 40–50 μm and width 50 μm) were formed on the surface of AISI 316L steel. With increasing temperature and sulfide ion concentration, the width, depth, and density of the pits increased on both steel samples. In the studied temperature and concentration range of sulfide ions, the AISI 316L steels exhibited higher corrosion resistance. Overall, the influence of sulfide ions on steel corrosion was more pronounced than the influence of temperature.

Zitieren

APA

Gudić, S., Vrsalović, L., Matošin, A., Krolo, J., Oguzie, E. E., & Nagode, A. (2023). Corrosion Behavior of Stainless Steel in Seawater in the Presence of Sulfide. Applied Sciences, 13(7), 4366. https://doi.org/10.3390/app13074366

Vancouver

Gudić S, Vrsalović L, Matošin A, Krolo J, Oguzie EE, Nagode A. Corrosion Behavior of Stainless Steel in Seawater in the Presence of Sulfide. Applied Sciences. 2023;13(7):4366. doi:10.3390/app13074366

BibTeX
@article{Gudi2023,
  author = {Gudić, Senka and Vrsalović, Ladislav and Matošin, Ante and Krolo, Jure and Oguzie, Emeka Emanuel and Nagode, Aleš},
  title = {Corrosion Behavior of Stainless Steel in Seawater in the Presence of Sulfide},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {7},
  pages = {4366},
  doi = {10.3390/app13074366}
}
Kostenlos starten →