EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of Performance Improvement of Passenger Car Synchronous Homopolar Generator with the Addition of Ferrite Magnets

Vladimir Prakht, Vladimir Dmitrievskii, Vadim Kazakbaev

Applied Sciences · 21.03.2023 · 13 (6) · 3990

DOI: 10.3390/app13063990 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 21.03.2023. Verfasst von Vladimir Prakht und 2 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation (Ural Federal University Program of Development within the Priority-2030 Program).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electric machines with hybrid excitation have increased torque density while maintaining a wide range of speed control. This article presents the results of the optimal design of a synchronous homopolar generator (SHG) with ferrite magnets on the rotor and excitation winding on the stator for passenger cars. The use of ferrite magnets on the rotor of a synchronous homopolar generator makes it possible to use the stator surface more efficiently, which in turn increases energy efficiency and reduces the dimensions of the generator. At the same time, the excitation winding on the stator provides a reliable brushless design and the ability to control the excitation flux. The problem of long-time calculation of the three-dimensional SHG structure, which is especially relevant when using multi-iterative computer optimization, is solved by using the computationally efficient Nelder-Mead method and a simplified SHG model using two-dimensional finite element analysis. It is also clear that the low torque ripple of SHG with ferrite magnets with two stator-rotor stack combinations (SRSC) is largely provided by the fact that the torque ripples of individual SRSCs are in antiphase. The problem of considering the magnetic properties of magnetic core sections made of structural low-carbon steel is discussed. It has been found that with an increase in both the saturation level of the magnetic circuit and the magnetomotive force (MMF) of the SHG excitation winding, resistance to irreversible demagnetization of ferrite magnets on the rotor can be increased by increasing their height. In addition, it is shown that there is a significant increase in performance when using the hybrid excitation, in comparison with the conventional SHG design without magnets.

Förderung

  • Ministry of Science and Higher Education of the Russian Federation (Ural Federal University Program of Development within the Priority-2030 Program)

Zitieren

APA

Prakht, V., Dmitrievskii, V., & Kazakbaev, V. (2023). Analysis of Performance Improvement of Passenger Car Synchronous Homopolar Generator with the Addition of Ferrite Magnets. Applied Sciences, 13(6), 3990. https://doi.org/10.3390/app13063990

Vancouver

Prakht V, Dmitrievskii V, Kazakbaev V. Analysis of Performance Improvement of Passenger Car Synchronous Homopolar Generator with the Addition of Ferrite Magnets. Applied Sciences. 2023;13(6):3990. doi:10.3390/app13063990

BibTeX
@article{Prakht2023,
  author = {Prakht, Vladimir and Dmitrievskii, Vladimir and Kazakbaev, Vadim},
  title = {Analysis of Performance Improvement of Passenger Car Synchronous Homopolar Generator with the Addition of Ferrite Magnets},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {6},
  pages = {3990},
  doi = {10.3390/app13063990}
}
Kostenlos starten →